UOTEK UT-885 USB to RS-485 RS-422 Converter 5-pin Terminal Block
- CONVERTER
- Black
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Thermaltake
Three 140 mm magnetic ARGB fans with reversible blades, 500–2000 RPM PWM control and hydraulic bearings
The Thermaltake SWAFAN EX14 arrives as a matched 140mm three-fan pack with hydraulic bearings and PWM control from 500 to 2000 RPM. Standard blades deliver 81.6 CFM at 34.5 dB-A while reverse blades provide 79.3 CFM at 38.8 dB-A. ARGB lighting connects through a 5V three-pin header and synchronises with motherboard RGB software.
Each frame uses a magnetic connector that links both the 2510 4-pin PWM cable and the 5V ARGB cable when fans are placed side by side, allowing up to five fans per cable run. Standard and reverse blades are both included and can be popped out and swapped without tools for different airflow directions or easy cleaning.
Verify your motherboard has enough 5V ARGB three-pin headers and 4-pin PWM headers for the daisy-chain length you plan. Decide whether standard or reverse blades suit your radiator, filter or case layout before mounting, as airflow and noise figures differ between the two orientations.
| Brand | Thermaltake |
|---|---|
| Model | SWAFAN EX14 |
| Part Number | CL-F168-PL14SW-A |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | PWM 500 ~ 2000 R.P.M |
| Air Flow | Standard Fan Blade: 81.6 CFM (one fan) Reverse Fan Blade: 79.3 CFM (one fan) |
| Noise Level | Standard Fan Blade: 34.5 dB-A (one fan) Reverse Fan Blade: 38.8 dB-A (one fan) |
| Power Connector | 2510-4 PIN PWM, 5V ARGB header-3PIN |
| Color | Black |
| LED | ARGB |
| Dimensions | 140 x 140 x 25 mm |
| Package Contents | 3 x Fan Frames 3 x Standard Fan Blade (Pre-installed) 3 x Reverse Fan Blade 3 x Cable |
| Siuntos svoris | 1.32 kg |
| Pakuotės dydis | 203 × 170 × 150 mm |
The hydraulic bearing is sealed for the life of the fan and does not require scheduled replacement; only the removable blades may need occasional cleaning.
At 2000 RPM each fan delivers 81.6 CFM with standard blades or 79.3 CFM with reverse blades; sustained operation does not reduce these rated figures.
Three fans at 2000 RPM produce 34.5 dB-A each with standard blades or 38.8 dB-A each with reverse blades, powered through a single 2510 4-pin PWM and 5V ARGB header.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?