Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Thermaltake

Thermaltake TOUGHFAN 12 RGB 3-pack case fan CL-F135-PL12SW-A

SKU CH-XXE4-4NFR9 MPN CL-F135-PL12SW-A

Three 120 mm PWM case fans with hydraulic bearings, 500–2000 RPM speed range and 16.8 million-colour RGB lighting

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • High static pressure of 2.4 mm-H2O for dense radiators
  • 8 million RGB colours from 24 addressable LEDs
  • PWM control up to 2000 RPM for precise cooling
  • Hydraulic bearing rated for quiet 21.2 dBA operation
  • Three 120 mm fans included in a single pack

Three-pack 120 mm RGB fans

Thermaltake TOUGHFAN 12 RGB ships as a trio of 120 x 120 x 25 mm case fans with addressable RGB lighting. Hydraulic bearings and PWM control allow speeds between 500 and 2000 RPM. The pack targets builders who want coordinated lighting and static-pressure cooling for radiators or restrictive mesh.

Standard 120 mm mounting with bundled controller

Each fan uses the familiar four-screw 120 mm pattern and a 4-pin PWM connector plus a 3-pin 5 V ARGB header. The included controller simplifies cable routing for the three units. Builders must verify their motherboard has enough 5 V ARGB headers or a compatible hub, otherwise lighting control will be limited.

2.4 mm-H₂O maximum static pressure

The 2.4 mm-H₂O peak pressure figure determines whether these fans can push air through dense radiator fins or restrictive filters. If the build needs higher static pressure for thick radiators, this spec may fall short. Buyers who need greater airflow at lower noise should check the 53.75 CFM and 21.2 dB-A ratings against their cooling targets.

Privalumai

  • High static pressure of 2.4 mm-H2O for dense radiators
  • 8 million RGB colours from 24 addressable LEDs
  • PWM control up to 2000 RPM for precise cooling
  • Hydraulic bearing rated for quiet 21.2 dBA operation
  • Three 120 mm fans included in a single pack

Specifikacijos

BrandThermaltake
SeriesTOUGHFAN
ModelCL-F135-PL12SW-A
Part NumberCL-F135-PL12SW-A
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air Flow50-55 CFM
Noise Level20 - 25 dBA
ColorBlack
LEDRGB
FeaturesThermaltake's all-new TOUGHFAN 12 RGB high static pressure fan now brings RGB lighting into the TOUGHFAN Series. This uniquely designed PWM-controlled fan has a fan speed of up to 2000 RPM to ensure high-end cooling needs and fulfill users' love of RGB lighting.
Dimensions120 x 120 x 25 mm
Siuntos svoris1.05 kg
Pakuotės dydis183 × 164 × 94 mm

Klausimai apie šią prekę

How can I confirm the fans are spinning at the correct 500-2000 RPM range after installation?

Use BIOS or fan-control software to monitor each fan's reported RPM; the three fans should read between 500 and 2000 RPM under PWM control.

What comes in the box and what must I buy separately?

The pack includes three 120 mm black fans with hydraulic bearings, a fan controller and mounting screws; no separate cables or adapters are required for standard 4-pin PWM headers.

Which version should I choose for maximum static pressure on a radiator?

This single SKU delivers 2.4 mm-H2O max static pressure and 53.75 CFM airflow, making it the designated high-static-pressure model for radiator use.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.