暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three black 120 mm RGB case fans with translucent frames and hydraulic bearings

Thermaltake

Thermaltake TOUGHFAN 12 RGB 3-pack case fan CL-F135-PL12SW-A

SKU CH-XXE4-4NFR9 MPN CL-F135-PL12SW-A

Three 120 mm PWM case fans with hydraulic bearings, 500–2000 RPM speed range and 16.8 million-colour RGB lighting

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • High static pressure of 2.4 mm-H2O for dense radiators
  • 8 million RGB colours from 24 addressable LEDs
  • PWM control up to 2000 RPM for precise cooling
  • Hydraulic bearing rated for quiet 21.2 dBA operation
  • Three 120 mm fans included in a single pack

Three-pack 120 mm RGB fans

Thermaltake TOUGHFAN 12 RGB ships as a trio of 120 x 120 x 25 mm case fans with addressable RGB lighting. Hydraulic bearings and PWM control allow speeds between 500 and 2000 RPM. The pack targets builders who want coordinated lighting and static-pressure cooling for radiators or restrictive mesh.

Standard 120 mm mounting with bundled controller

Each fan uses the familiar four-screw 120 mm pattern and a 4-pin PWM connector plus a 3-pin 5 V ARGB header. The included controller simplifies cable routing for the three units. Builders must verify their motherboard has enough 5 V ARGB headers or a compatible hub, otherwise lighting control will be limited.

2.4 mm-H₂O maximum static pressure

The 2.4 mm-H₂O peak pressure figure determines whether these fans can push air through dense radiator fins or restrictive filters. If the build needs higher static pressure for thick radiators, this spec may fall short. Buyers who need greater airflow at lower noise should check the 53.75 CFM and 21.2 dB-A ratings against their cooling targets.

特長

  • High static pressure of 2.4 mm-H2O for dense radiators
  • 8 million RGB colours from 24 addressable LEDs
  • PWM control up to 2000 RPM for precise cooling
  • Hydraulic bearing rated for quiet 21.2 dBA operation
  • Three 120 mm fans included in a single pack

仕様

BrandThermaltake
SeriesTOUGHFAN
ModelCL-F135-PL12SW-A
Part NumberCL-F135-PL12SW-A
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air Flow50-55 CFM
Noise Level20 - 25 dBA
ColorBlack
LEDRGB
FeaturesThermaltake's all-new TOUGHFAN 12 RGB high static pressure fan now brings RGB lighting into the TOUGHFAN Series. This uniquely designed PWM-controlled fan has a fan speed of up to 2000 RPM to ensure high-end cooling needs and fulfill users' love of RGB lighting.
Dimensions120 x 120 x 25 mm
配送重量1.05 kg
梱包サイズ183 × 164 × 94 mm

この商品に関する質問

How can I confirm the fans are spinning at the correct 500-2000 RPM range after installation?

Use BIOS or fan-control software to monitor each fan's reported RPM; the three fans should read between 500 and 2000 RPM under PWM control.

What comes in the box and what must I buy separately?

The pack includes three 120 mm black fans with hydraulic bearings, a fan controller and mounting screws; no separate cables or adapters are required for standard 4-pin PWM headers.

Which version should I choose for maximum static pressure on a radiator?

This single SKU delivers 2.4 mm-H2O max static pressure and 53.75 CFM airflow, making it the designated high-static-pressure model for radiator use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。