Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
TYAN S1837UANG ThunderBOLT server motherboard, green PCB, dual Slot-1 sockets, silver heatsinks

TYAN

TYAN S1837UANG ThunderBOLT 440GX 133MHz server motherboard

SKU CH-GM52-HH3CT

Dual Slot-1 server motherboard built on the Intel 440GX chipset with 133 MHz front-side bus

  • Dual Slot-1 design enables twin CPU installation
  • Intel 440GX chipset runs at 133 MHz FSB
  • ThunderBOLT model name identifies the S1837UANG platform
  • New condition means full factory specification intact

Dual Slot-1 server board

The TYAN S1837UANG ThunderBOLT is a 440GX server motherboard built for dual Slot-1 processors running at 133 MHz. It targets administrators who maintain or repair legacy rack systems that still rely on this platform.

Direct replacement for failed 440GX units

The jump is worth it when an existing dual-processor board has failed and an identical form-factor match is required to avoid chassis or backplane changes. Buyers who need a different chipset or a single-socket layout cannot use this board.

Privalumai

  • Dual Slot-1 design enables twin CPU installation
  • Intel 440GX chipset runs at 133 MHz FSB
  • ThunderBOLT model name identifies the S1837UANG platform
  • New condition means full factory specification intact

Specifikacijos

BrandTyan
ModelS1837UANG

Klausimai apie šią prekę

What chassis clearance does the dual Slot-1 layout on the S1837UANG require?

The dual Slot-1 sockets sit side by side, so the case must provide enough width for two processor cartridges and their retention mechanisms without fouling adjacent expansion slots or power connectors.

Which step is often missed when seating the Slot-1 processors on this ThunderBOLT board?

After inserting each cartridge, the retention lever must be fully latched and the securing screw tightened; skipping the screw leaves the processor loose and causes intermittent contact.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.