Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
TYAN S1837UANG ThunderBOLT server motherboard, green PCB, dual Slot-1 sockets, silver heatsinks

TYAN

TYAN S1837UANG ThunderBOLT 440GX 133MHz server motherboard

SKU CH-GM52-HH3CT

Dual Slot-1 server motherboard built on the Intel 440GX chipset with 133 MHz front-side bus

  • Dual Slot-1 design enables twin CPU installation
  • Intel 440GX chipset runs at 133 MHz FSB
  • ThunderBOLT model name identifies the S1837UANG platform
  • New condition means full factory specification intact

Dual Slot-1 server board

The TYAN S1837UANG ThunderBOLT is a 440GX server motherboard built for dual Slot-1 processors running at 133 MHz. It targets administrators who maintain or repair legacy rack systems that still rely on this platform.

Direct replacement for failed 440GX units

The jump is worth it when an existing dual-processor board has failed and an identical form-factor match is required to avoid chassis or backplane changes. Buyers who need a different chipset or a single-socket layout cannot use this board.

Punti di forza

  • Dual Slot-1 design enables twin CPU installation
  • Intel 440GX chipset runs at 133 MHz FSB
  • ThunderBOLT model name identifies the S1837UANG platform
  • New condition means full factory specification intact

Caratteristiche tecniche

BrandTyan
ModelS1837UANG

Domande su questo articolo

What chassis clearance does the dual Slot-1 layout on the S1837UANG require?

The dual Slot-1 sockets sit side by side, so the case must provide enough width for two processor cartridges and their retention mechanisms without fouling adjacent expansion slots or power connectors.

Which step is often missed when seating the Slot-1 processors on this ThunderBOLT board?

After inserting each cartridge, the retention lever must be fully latched and the securing screw tightened; skipping the screw leaves the processor loose and causes intermittent contact.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.