Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Thick black cable with P13 locking plug and C20 connector, six feet long

Valiant Power

Valiant Power P13 to IEC C20 Power Cord 12 AWG 20A 240V 6ft

SKU CH-E7JR-ZWJWT

Heavy-duty 12 AWG cord with P13 locking plug to IEC C20, rated 240V 20A and tested to 4800W for Antminer S21 and S19j XP

Options 3ft

  • Delivers up to 4800 watts for continuous mining loads
  • 12 AWG pure copper conductors handle 20 amps at 240 volts
  • P13 PA45 locking plug secures connection to 240V outlets
  • IEC C20 end fits Antminer S19j XP and S21 units
  • SJT PVC jacket rated to 105°C withstands high-heat mining environments

Power cord for ASIC miners

The Valiant Power P13 to IEC C20 cord connects 240V outlets to Bitmain Antminer S21 and S19j XP units. Its 12 AWG pure copper conductors carry 20 amps for up to 4800 watts of continuous load. The PA45 locking plug prevents accidental disconnection during operation.

Suits high-density mining rows

Operators running S21 or S19j XP fleets on 240V circuits gain a secure, high-temperature link. Facilities using different inlet styles or lower-voltage feeds should select a matching cord instead.

Fits standard PDU and miner inlets

The C20 end plugs directly into the miner or a compatible power distribution unit. The six-foot length bridges typical rack spacing without excess slack. The SJT jacket withstands 105°C environments common in dense mining halls.

Privalumai

  • Delivers up to 4800 watts for continuous mining loads
  • 12 AWG pure copper conductors handle 20 amps at 240 volts
  • P13 PA45 locking plug secures connection to 240V outlets
  • IEC C20 end fits Antminer S19j XP and S21 units
  • SJT PVC jacket rated to 105°C withstands high-heat mining environments

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this cord reach a wall outlet from my rack-mounted Antminer S21?

The cord is 6 feet long, which covers most rack-to-outlet runs in a standard mining shelf.

Does the P13 plug lock securely so it will not vibrate loose on an S19j XP?

The P13 connector uses a PA45 locking design that resists vibration in high-heat mining environments.

Can this cord handle continuous 4800-watt loads without overheating?

It is tested up to 4800 watts with a 12 AWG copper core and SJT jacket rated to 105°C for sustained operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.