Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three-foot heavy-duty power cord with P13 locking plug to C20 connector, 12 AWG copper, black PVC jacket

Valiant Power

Valiant Power 3ft P13 to C20 12 AWG 20A 240V Mining Power Cord

SKU CH-DK6R-H881Y

Heavy-duty 12 AWG copper cord with P13 locking plug to C20 connector, rated 20 A at 240 V for Bitmain Antminer S21 and S19j XP

Options 6ft

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

Connector and Rating

This cable uses a P13 PA45 locking plug on one end and an IEC C20 connector on the other. It is rated for 20 amps at 240 volts with 12 AWG pure copper conductors. The SJT PVC jacket withstands temperatures up to 105 degrees Celsius.

Power Capacity

The assembly is tested to handle continuous loads up to 4800 watts. That rating matches the draw of high-density ASIC miners such as the Antminer S21 and S19j XP. The heavy-gauge copper keeps voltage drop low across the three-foot run.

Build Integration

The locking P13 plug secures to compatible 240V outlets or PDU strips, preventing accidental disconnects in dense racks. The C20 end mates directly with the miner’s inlet or a matching C19 lead. The short length reduces cable clutter and leaves more room for airflow around power supplies.

Privalumai

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this cord fit my Antminer S21?

Yes, the C20 connector on this cord is designed for the Antminer S21 and S19j XP models.

Is the 3-foot length enough to reach my PDU?

At 3 feet, this cord suits tight rack spacing; measure your outlet-to-miner distance before ordering.

Can it handle continuous 240 V mining loads?

The 12 AWG copper conductors and 105 °C SJT jacket are tested to 4800 watts for sustained operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.