Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Three-foot heavy-duty power cord with P13 locking plug to C20 connector, 12 AWG copper, black PVC jacket

Valiant Power

Valiant Power 3ft P13 to C20 12 AWG 20A 240V Mining Power Cord

SKU CH-DK6R-H881Y

Heavy-duty 12 AWG copper cord with P13 locking plug to C20 connector, rated 20 A at 240 V for Bitmain Antminer S21 and S19j XP

Options 6ft

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

Connector and Rating

This cable uses a P13 PA45 locking plug on one end and an IEC C20 connector on the other. It is rated for 20 amps at 240 volts with 12 AWG pure copper conductors. The SJT PVC jacket withstands temperatures up to 105 degrees Celsius.

Power Capacity

The assembly is tested to handle continuous loads up to 4800 watts. That rating matches the draw of high-density ASIC miners such as the Antminer S21 and S19j XP. The heavy-gauge copper keeps voltage drop low across the three-foot run.

Build Integration

The locking P13 plug secures to compatible 240V outlets or PDU strips, preventing accidental disconnects in dense racks. The C20 end mates directly with the miner’s inlet or a matching C19 lead. The short length reduces cable clutter and leaves more room for airflow around power supplies.

Priekšrocības

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this cord fit my Antminer S21?

Yes, the C20 connector on this cord is designed for the Antminer S21 and S19j XP models.

Is the 3-foot length enough to reach my PDU?

At 3 feet, this cord suits tight rack spacing; measure your outlet-to-miner distance before ordering.

Can it handle continuous 240 V mining loads?

The 12 AWG copper conductors and 105 °C SJT jacket are tested to 4800 watts for sustained operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.