暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three-foot heavy-duty power cord with P13 locking plug to C20 connector, 12 AWG copper, black PVC jacket

Valiant Power

Valiant Power 3ft P13 to C20 12 AWG 20A 240V Mining Power Cord

SKU CH-DK6R-H881Y

Heavy-duty 12 AWG copper cord with P13 locking plug to C20 connector, rated 20 A at 240 V for Bitmain Antminer S21 and S19j XP

Options 6ft

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

Connector and Rating

This cable uses a P13 PA45 locking plug on one end and an IEC C20 connector on the other. It is rated for 20 amps at 240 volts with 12 AWG pure copper conductors. The SJT PVC jacket withstands temperatures up to 105 degrees Celsius.

Power Capacity

The assembly is tested to handle continuous loads up to 4800 watts. That rating matches the draw of high-density ASIC miners such as the Antminer S21 and S19j XP. The heavy-gauge copper keeps voltage drop low across the three-foot run.

Build Integration

The locking P13 plug secures to compatible 240V outlets or PDU strips, preventing accidental disconnects in dense racks. The C20 end mates directly with the miner’s inlet or a matching C19 lead. The short length reduces cable clutter and leaves more room for airflow around power supplies.

特長

  • Heavy-duty 12 AWG copper carries 20 A at 240 V for stable miner power
  • P13 PA45 locking plug secures the 240 V outlet connection against vibration
  • IEC C20 end mates directly with Antminer S21 and S19j XP power inputs
  • SJT PVC jacket rated to 105 °C withstands sustained high-heat mining loads
  • Tested to 4800 W continuous for reliable long-term operation

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this cord fit my Antminer S21?

Yes, the C20 connector on this cord is designed for the Antminer S21 and S19j XP models.

Is the 3-foot length enough to reach my PDU?

At 3 feet, this cord suits tight rack spacing; measure your outlet-to-miner distance before ordering.

Can it handle continuous 240 V mining loads?

The 12 AWG copper conductors and 105 °C SJT jacket are tested to 4800 watts for sustained operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。