Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

VisionTek

VisionTek 901554 DLX3 256GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD

SKU CH-S6D5-XMSNE MPN 901554

256GB M.2 2280 PCIe 3.0 x4 NVMe 1.3 drive with 3D NAND, InnoGrit controller, up to 3300 MBps read and 2900 MBps write, TCG Opal v2.01 encryption

  • Device TypeExternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity256GB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Fast boot and load times with up to 3300 MBps sequential read
  • Responsive multitasking from up to 2900 MBps sequential write
  • Snappy random access at up to 370K IOPS read
  • Quick file saves via up to 288K IOPS write
  • Data protected by TCG Opal v2.01 encryption

VisionTek DLX3 256GB NVMe SSD

The VisionTek DLX3 901554 is a 256GB internal SSD built on the M.2 2280 form factor. It connects through a PCIe 3.0 x4 interface using the NVMe 1.3 protocol. The drive targets professionals, gamers and everyday users who need fast solid-state storage for consumer workloads.

Check motherboard M.2 slot and OS support

Verify that your motherboard provides an M.2 2280 slot wired for PCIe 3.0 x4 and NVMe 1.3. The drive uses 3D NAND flash and an InnoGrit IG5216 controller with SLC caching but no DRAM cache. TCG Opal v2.01 encryption is supported for data security. Operating temperature range is 0°C to 70°C.

Sustained load behaviour and power draw

Under continuous operation the controller manages thermal limits within the 0°C to 70°C window. Active power draw reaches 4.75W while idle consumption sits at 0.3W. Sequential speeds of up to 3300 MBps read and 2900 MBps write are peak figures; prolonged heavy writes will settle at the controller's sustained throughput after SLC cache exhaustion.

Privalumai

  • Fast boot and load times with up to 3300 MBps sequential read
  • Responsive multitasking from up to 2900 MBps sequential write
  • Snappy random access at up to 370K IOPS read
  • Quick file saves via up to 288K IOPS write
  • Data protected by TCG Opal v2.01 encryption

Specifikacijos

BrandVisionTek
SeriesDLX3
Model2280
Part Number901554
Device TypeExternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity256GB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
ControllerInnoGrit
CacheNo DRAM (SLC)
EncryptionTCG Opal v2.01
Max Sequential ReadUp to 3300 MBps
Max Sequential WriteUp to 2900 MBps
4KB Random ReadUp to 370K IOPS
4KB Random WriteUp to 288K IOPS
Power Consumption (Idle)0.3W
Power Consumption (Active)4.75W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Siuntos svoris0.23 kg
Pakuotės dydis178 × 76 × 25 mm

Klausimai apie šią prekę

Does the 901554 ship with a heatsink or mounting screw, or do I need to buy them separately?

The drive is supplied as a bare M.2 2280 module; a motherboard standoff screw and any heatsink must be sourced separately.

Should I choose the 256GB DLX3 or step up to a larger capacity for the InnoGrit IG5216 controller?

The 256GB model delivers the same 3300 MBps read and 2900 MBps write peaks as higher capacities, so select capacity based on storage need rather than speed.

Will the advertised 3300 MBps sequential read hold up in a PCIe 3.0 x4 slot under everyday workloads?

The 3300 MBps figure is the controller ceiling on a PCIe 3.0 x4 link; real-world throughput will vary with thermal conditions, queue depth and file sizes.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.