VisionTek
VisionTek 901554 DLX3 256GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD
256GB M.2 2280 PCIe 3.0 x4 NVMe 1.3 drive with 3D NAND, InnoGrit controller, up to 3300 MBps read and 2900 MBps write, TCG Opal v2.01 encryption
- Device TypeExternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity256GB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
- Fast boot and load times with up to 3300 MBps sequential read
- Responsive multitasking from up to 2900 MBps sequential write
- Snappy random access at up to 370K IOPS read
- Quick file saves via up to 288K IOPS write
- Data protected by TCG Opal v2.01 encryption
VisionTek DLX3 256GB NVMe SSD
The VisionTek DLX3 901554 is a 256GB internal SSD built on the M.2 2280 form factor. It connects through a PCIe 3.0 x4 interface using the NVMe 1.3 protocol. The drive targets professionals, gamers and everyday users who need fast solid-state storage for consumer workloads.
Check motherboard M.2 slot and OS support
Verify that your motherboard provides an M.2 2280 slot wired for PCIe 3.0 x4 and NVMe 1.3. The drive uses 3D NAND flash and an InnoGrit IG5216 controller with SLC caching but no DRAM cache. TCG Opal v2.01 encryption is supported for data security. Operating temperature range is 0°C to 70°C.
Sustained load behaviour and power draw
Under continuous operation the controller manages thermal limits within the 0°C to 70°C window. Active power draw reaches 4.75W while idle consumption sits at 0.3W. Sequential speeds of up to 3300 MBps read and 2900 MBps write are peak figures; prolonged heavy writes will settle at the controller's sustained throughput after SLC cache exhaustion.
จุดเด่น
- Fast boot and load times with up to 3300 MBps sequential read
- Responsive multitasking from up to 2900 MBps sequential write
- Snappy random access at up to 370K IOPS read
- Quick file saves via up to 288K IOPS write
- Data protected by TCG Opal v2.01 encryption
ข้อมูลจำเพาะ
| Brand | VisionTek |
|---|---|
| Series | DLX3 |
| Model | 2280 |
| Part Number | 901554 |
| Device Type | External Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Controller | InnoGrit |
| Cache | No DRAM (SLC) |
| Encryption | TCG Opal v2.01 |
| Max Sequential Read | Up to 3300 MBps |
| Max Sequential Write | Up to 2900 MBps |
| 4KB Random Read | Up to 370K IOPS |
| 4KB Random Write | Up to 288K IOPS |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| น้ำหนักในการจัดส่ง | 0.23 kg |
| ขนาดบรรจุภัณฑ์ | 178 × 76 × 25 mm |
คำถามเกี่ยวกับสินค้านี้
Does the 901554 ship with a heatsink or mounting screw, or do I need to buy them separately?
The drive is supplied as a bare M.2 2280 module; a motherboard standoff screw and any heatsink must be sourced separately.
Should I choose the 256GB DLX3 or step up to a larger capacity for the InnoGrit IG5216 controller?
The 256GB model delivers the same 3300 MBps read and 2900 MBps write peaks as higher capacities, so select capacity based on storage need rather than speed.
Will the advertised 3300 MBps sequential read hold up in a PCIe 3.0 x4 slot under everyday workloads?
The 3300 MBps figure is the controller ceiling on a PCIe 3.0 x4 link; real-world throughput will vary with thermal conditions, queue depth and file sizes.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



