Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Metal bracket with two eSATAp ports and internal SATA connectors

Vszerda

Vszerda 2-Port SATA to Power eSATAp Bracket Adapter

SKU CH-ZPH7-VX2SP

Adds two eSATAp ports with 12V/5V power and USB 2.0 data via internal SATA and motherboard headers

  • Adds two external eSATAp ports from internal SATA headers
  • Delivers 12V and 5V power to 2.5" and 3.5" drives
  • Includes USB 2.0 data up to 480Mbps via 9-pin header
  • Powered by PSU through 15-pin SATA to 4-pin adapter
  • Plug-and-play operation with no driver installation required

Vszerda 2-Port eSATAp Bracket Adapter

This adapter adds two external eSATAp ports to a desktop using internal SATA connections. It suits builders who want hot-swap access to bare 2.5" or 3.5" drives without opening the case. The bracket fits a standard full-profile expansion slot and requires a motherboard SATA host and a USB 2.0 header. It is not for systems lacking internal SATA ports or a spare USB header.

Thermals, noise and power draw

The board itself has no active cooling and produces no audible noise. Power for connected drives comes from the PSU via the included SATA 15-pin to 4-pin adapter cable, delivering 12V and 5V rails. The adapter draws negligible power for its own logic, so total consumption depends entirely on the attached drives. No fan or heatsink is present, keeping the installation silent.

Single specification: 11-pin eSATAp combo port

Each external port combines eSATA and USB 2.0 in one 11-pin connector, supporting data up to 480 Mbps over USB and native SATA speeds over eSATA. This hybrid interface lets you plug either an eSATA drive or a USB 2.0 device into the same port. If your workflow needs USB 3.0 or higher throughput, this adapter will not meet that requirement.

Privalumai

  • Adds two external eSATAp ports from internal SATA headers
  • Delivers 12V and 5V power to 2.5" and 3.5" drives
  • Includes USB 2.0 data up to 480Mbps via 9-pin header
  • Powered by PSU through 15-pin SATA to 4-pin adapter
  • Plug-and-play operation with no driver installation required

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I connect the 9-pin USB header and the SATA 15-pin power cable to get both eSATA and USB 2.0 working on the bracket?

Plug the 9-pin header cable into the motherboard USB 2.0 header and attach the SATA 15-pin to SP4 4-pin adapter to the PSU; both must be connected for the 11-pin eSATAp ports to deliver 12V/5V power and 480 Mbps USB data.

Which cables or headers will I need to replace if a port stops delivering power or USB data later?

The SATA 15-pin to SP4 4-pin power adapter cable and the USB 9-pin header cable are the only field-replaceable links; the bracket itself has no user-serviceable parts.

At what transfer rate does the USB 2.0 link cap sustained copies when I use the eSATAp ports for external drives?

The USB 2.0 connection limits sustained throughput to 480 Mbps, so large file moves will hit that ceiling before the eSATA lane does.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.