Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Metal bracket with two eSATAp ports and internal SATA connectors

Vszerda

Vszerda 2-Port SATA to Power eSATAp Bracket Adapter

SKU CH-ZPH7-VX2SP

Adds two eSATAp ports with 12V/5V power and USB 2.0 data via internal SATA and motherboard headers

  • Adds two external eSATAp ports from internal SATA headers
  • Delivers 12V and 5V power to 2.5" and 3.5" drives
  • Includes USB 2.0 data up to 480Mbps via 9-pin header
  • Powered by PSU through 15-pin SATA to 4-pin adapter
  • Plug-and-play operation with no driver installation required

Vszerda 2-Port eSATAp Bracket Adapter

This adapter adds two external eSATAp ports to a desktop using internal SATA connections. It suits builders who want hot-swap access to bare 2.5" or 3.5" drives without opening the case. The bracket fits a standard full-profile expansion slot and requires a motherboard SATA host and a USB 2.0 header. It is not for systems lacking internal SATA ports or a spare USB header.

Thermals, noise and power draw

The board itself has no active cooling and produces no audible noise. Power for connected drives comes from the PSU via the included SATA 15-pin to 4-pin adapter cable, delivering 12V and 5V rails. The adapter draws negligible power for its own logic, so total consumption depends entirely on the attached drives. No fan or heatsink is present, keeping the installation silent.

Single specification: 11-pin eSATAp combo port

Each external port combines eSATA and USB 2.0 in one 11-pin connector, supporting data up to 480 Mbps over USB and native SATA speeds over eSATA. This hybrid interface lets you plug either an eSATA drive or a USB 2.0 device into the same port. If your workflow needs USB 3.0 or higher throughput, this adapter will not meet that requirement.

Priekšrocības

  • Adds two external eSATAp ports from internal SATA headers
  • Delivers 12V and 5V power to 2.5" and 3.5" drives
  • Includes USB 2.0 data up to 480Mbps via 9-pin header
  • Powered by PSU through 15-pin SATA to 4-pin adapter
  • Plug-and-play operation with no driver installation required

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I connect the 9-pin USB header and the SATA 15-pin power cable to get both eSATA and USB 2.0 working on the bracket?

Plug the 9-pin header cable into the motherboard USB 2.0 header and attach the SATA 15-pin to SP4 4-pin adapter to the PSU; both must be connected for the 11-pin eSATAp ports to deliver 12V/5V power and 480 Mbps USB data.

Which cables or headers will I need to replace if a port stops delivering power or USB data later?

The SATA 15-pin to SP4 4-pin power adapter cable and the USB 9-pin header cable are the only field-replaceable links; the bracket itself has no user-serviceable parts.

At what transfer rate does the USB 2.0 link cap sustained copies when I use the eSATAp ports for external drives?

The USB 2.0 connection limits sustained throughput to 480 Mbps, so large file moves will hit that ceiling before the eSATA lane does.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.