Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular black plastic caddy with 13-pin SATA connector and 9.5mm profile

Vszerda

Vszerda MSATA NGFF B/M-Key SSD to Slimline SATA 13Pin Caddy Case 9.5mm

SKU CH-XZQJ-SC9B6

Converts a 9.5 mm optical bay into a second SATA drive slot using a switchable mSATA or B/M-key NGFF adapter

  • Adds secondary storage by converting an optical bay into a 13-pin SATA drive slot
  • Supports mSATA or NGFF B/M-key SSDs via a manual selector switch
  • Installs without cables, power adapters or driver software for plug-and-play operation
  • Enables dual-boot configurations with a second operating system on the added drive
  • Fits 9.5 mm universal laptop optical bays for broad compatibility

Versatile caddy for MSATA and NGFF B/M-key SSDs

This adapter converts a 9.5mm laptop optical bay into a secondary SATA drive slot. It accepts either an MSATA SSD or an NGFF B-key or B/M-key SSD, selected via a physical switch on the caddy. No cables, external power or driver installation are required for operation.

Suits owners of older laptops

The caddy enables dual-boot setups and fast local backups by adding a second solid-state drive alongside the primary system drive. Builders who only have an M-key NGFF module cannot use this adapter, and users wanting to run both an MSATA and an NGFF drive at the same time will need a different approach.

Key constraint: NGFF support limited to B-key

The adapter will not function with an M-key only NGFF SSD, regardless of its physical fit. A switch on the housing selects between the MSATA and NGFF interfaces, but only one drive type can be active at any time. The connection uses a standard 13-pin Slimline SATA interface.

Privalumai

  • Adds secondary storage by converting an optical bay into a 13-pin SATA drive slot
  • Supports mSATA or NGFF B/M-key SSDs via a manual selector switch
  • Installs without cables, power adapters or driver software for plug-and-play operation
  • Enables dual-boot configurations with a second operating system on the added drive
  • Fits 9.5 mm universal laptop optical bays for broad compatibility

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What SATA speed does the 13-pin Slimline interface deliver in practice?

The caddy passes the laptop's native SATA link straight through, so an mSATA or B-key NGFF SSD runs at the host drive's rated SATA I/II/III throughput without any added bottleneck.

Will this 9.5 mm high caddy fit my laptop's optical bay?

Yes — the tray is built to the standard 9.5 mm slimline optical-drive height and uses the 13-pin Slimline SATA connector, matching most universal laptop CD/DVD-ROM bays.

How do I install an mSATA or NGFF SSD and what step is often missed?

Open the retaining latch, seat the drive at an angle into the mSATA or NGFF B/M-key slot, press down until it clicks, close the latch, set the selector switch to the correct drive type, then slide the whole caddy into the optical bay.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.