Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular black plastic caddy with 13-pin SATA connector and 9.5mm profile

Vszerda

Vszerda MSATA NGFF B/M-Key SSD to Slimline SATA 13Pin Caddy Case 9.5mm

SKU CH-XZQJ-SC9B6

Converts a 9.5 mm optical bay into a second SATA drive slot using a switchable mSATA or B/M-key NGFF adapter

  • Adds secondary storage by converting an optical bay into a 13-pin SATA drive slot
  • Supports mSATA or NGFF B/M-key SSDs via a manual selector switch
  • Installs without cables, power adapters or driver software for plug-and-play operation
  • Enables dual-boot configurations with a second operating system on the added drive
  • Fits 9.5 mm universal laptop optical bays for broad compatibility

Versatile caddy for MSATA and NGFF B/M-key SSDs

This adapter converts a 9.5mm laptop optical bay into a secondary SATA drive slot. It accepts either an MSATA SSD or an NGFF B-key or B/M-key SSD, selected via a physical switch on the caddy. No cables, external power or driver installation are required for operation.

Suits owners of older laptops

The caddy enables dual-boot setups and fast local backups by adding a second solid-state drive alongside the primary system drive. Builders who only have an M-key NGFF module cannot use this adapter, and users wanting to run both an MSATA and an NGFF drive at the same time will need a different approach.

Key constraint: NGFF support limited to B-key

The adapter will not function with an M-key only NGFF SSD, regardless of its physical fit. A switch on the housing selects between the MSATA and NGFF interfaces, but only one drive type can be active at any time. The connection uses a standard 13-pin Slimline SATA interface.

Helstu kostir

  • Adds secondary storage by converting an optical bay into a 13-pin SATA drive slot
  • Supports mSATA or NGFF B/M-key SSDs via a manual selector switch
  • Installs without cables, power adapters or driver software for plug-and-play operation
  • Enables dual-boot configurations with a second operating system on the added drive
  • Fits 9.5 mm universal laptop optical bays for broad compatibility

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What SATA speed does the 13-pin Slimline interface deliver in practice?

The caddy passes the laptop's native SATA link straight through, so an mSATA or B-key NGFF SSD runs at the host drive's rated SATA I/II/III throughput without any added bottleneck.

Will this 9.5 mm high caddy fit my laptop's optical bay?

Yes — the tray is built to the standard 9.5 mm slimline optical-drive height and uses the 13-pin Slimline SATA connector, matching most universal laptop CD/DVD-ROM bays.

How do I install an mSATA or NGFF SSD and what step is often missed?

Open the retaining latch, seat the drive at an angle into the mSATA or NGFF B/M-key slot, press down until it clicks, close the latch, set the selector switch to the correct drive type, then slide the whole caddy into the optical bay.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.