Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Fluorescent yellow 1.75mm PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro 1.75mm Filament 1kg Fluorescent Yellow 3D Printers Accessory

SKU CH-M6DS-3NA1Z

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm tolerance for consistent extrusion and smooth layer adhesion

  • ColorFluorescent Yellow
  • TypeFilament
  • Precise layers from ±0.03 mm diameter tolerance
  • Dry filament guaranteed by vacuum-sealed airtight packaging
  • Smooth prints with low shrinkage and strong layer adhesion
  • Vivid fluorescent yellow from high-purity saturated pigment
  • Odourless biodegradable PLA prints without a heated bed

Filament tolerance and winding

Ziro 3D PLA Pro filament is manufactured to a ±0.03mm dimensional tolerance and supplied on a 1kg spool with 1.75mm diameter. The roll is wound to be 100% tangle-free and vacuum sealed so it arrives dry and ready to use.

Print behaviour across long jobs

The material prints at 190-220°C with a suggested speed range of 30-90mm/s and an optional bed temperature of 50-60°C. Low shrinkage and strong layer adhesion keep dimensions stable over extended prints, while the PLA composition produces no odour during operation.

Upgrade from inconsistent or moist filament

This spool replaces filament that varies in diameter, tangles on the reel or has absorbed moisture and causes surface defects. The tight tolerance and sealed packaging remove those variables, making the step worthwhile for any FDM printer that accepts 1.75mm material and needs reliable, repeatable results.

Privalumai

  • Precise layers from ±0.03 mm diameter tolerance
  • Dry filament guaranteed by vacuum-sealed airtight packaging
  • Smooth prints with low shrinkage and strong layer adhesion
  • Vivid fluorescent yellow from high-purity saturated pigment
  • Odourless biodegradable PLA prints without a heated bed

Specifikacijos

ColorFluorescent Yellow
TypeFilament

Klausimai apie šią prekę

Does the 1.75mm filament produce any smell or fumes when printing at 190-220°C for long sessions?

The PLA Pro material prints with no odor, so extended runs at 190-220°C stay smell-free.

My printer only takes 1.75mm spools — will this 1kg roll fit and feed without extra hardware?

The 1.75mm diameter and 1kg spool work directly on most FDM printers including Creality, Anycubic and Bambu models.

I still run an older FDM machine without a heated bed — can I print this fluorescent yellow PLA at the suggested 30-90mm/s?

Yes, the filament prints well without a heated bed; the optional bed temperature is only 50-60°C if your printer has one.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.