Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 60 by 15 mm case fan with three-pin connector

Zyvpee

Zyvpee 2406KL-04W-B29 T53 60x15mm 3-pin case fan

SKU CH-YX6X-TA42D

A 60×15 mm case fan with ball bearing, 12 V 0.1 A three-pin power and under 1600 RPM for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for longer service life
  • 12 V DC at 0.1 A draws minimal power
  • 60 × 15 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1 600 RPM keeps noise low

Compact 60 mm frame

The Zyvpee 2406KL-04W-B29 T53 is a 60 mm by 15 mm case fan built for tight chassis and small-form-factor builds. It draws .1 A at 12 V through a standard three-pin connector and spins below 1600 RPM using a ball bearing. The black non-LED design keeps the interior clean and unlit.

Builders with restricted clearance

This fan suits systems where a 60 mm footprint is the maximum allowed, such as slim towers, HTPC cases or custom GPU shrouds. It is not for builds that demand high static pressure, silent operation below audible thresholds or PWM speed control. Buyers needing larger airflow volumes or four-pin regulation should look at alternative sizes.

Targeted airflow for focused cooling

At its rated speed the fan delivers enough air movement for localised component cooling, such as VRM heatsinks or chipset coolers. It runs out of headroom when tasked with exhausting a full-size tower or feeding a dense radiator. The three-pin header provides voltage-based speed adjustment only, so the lowest speeds are limited by the motherboard's voltage floor.

Privalumai

  • Ball bearing for longer service life
  • 12 V DC at 0.1 A draws minimal power
  • 60 × 15 mm frame fits tight spaces
  • Three-pin connector enables speed monitoring
  • Under 1 600 RPM keeps noise low

Specifikacijos

BrandZyvpee
Series2406KL-04W-B29 T53
Model2406KL-04W-B29
TypeCase Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*15MM

Klausimai apie šią prekę

Does this fan need a 3-pin header on the motherboard or a fan controller to run?

It uses a 3-pin connector that plugs directly into a standard motherboard header or a compatible fan controller supplying 12 V power.

Will the 60 mm by 15 mm frame fit the same mounting holes as my existing 60 mm fans?

Yes, the 60 mm square frame with 15 mm thickness matches the standard 60 mm mounting pattern used by most 60 mm case and CPU fans.

How can I confirm the fan is spinning at the rated speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report speeds up to 1600 RPM when the fan is powered at 12 V.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.