Zyvpee
Zyvpee 2406KL-04W-B29 T53 60x15mm 3-pin case fan
A 60×15 mm case fan with ball bearing, 12 V 0.1 A three-pin power and under 1600 RPM for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Ball bearing for longer service life
- 12 V DC at 0.1 A draws minimal power
- 60 × 15 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Under 1 600 RPM keeps noise low
Compact 60 mm frame
The Zyvpee 2406KL-04W-B29 T53 is a 60 mm by 15 mm case fan built for tight chassis and small-form-factor builds. It draws .1 A at 12 V through a standard three-pin connector and spins below 1600 RPM using a ball bearing. The black non-LED design keeps the interior clean and unlit.
Builders with restricted clearance
This fan suits systems where a 60 mm footprint is the maximum allowed, such as slim towers, HTPC cases or custom GPU shrouds. It is not for builds that demand high static pressure, silent operation below audible thresholds or PWM speed control. Buyers needing larger airflow volumes or four-pin regulation should look at alternative sizes.
Targeted airflow for focused cooling
At its rated speed the fan delivers enough air movement for localised component cooling, such as VRM heatsinks or chipset coolers. It runs out of headroom when tasked with exhausting a full-size tower or feeding a dense radiator. The three-pin header provides voltage-based speed adjustment only, so the lowest speeds are limited by the motherboard's voltage floor.
Poudarki
- Ball bearing for longer service life
- 12 V DC at 0.1 A draws minimal power
- 60 × 15 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Under 1 600 RPM keeps noise low
Specifikacije
| Brand | Zyvpee |
|---|---|
| Series | 2406KL-04W-B29 T53 |
| Model | 2406KL-04W-B29 |
| Type | Case Fan |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 60*15MM |
Vprašanja o tem izdelku
Does this fan need a 3-pin header on the motherboard or a fan controller to run?
It uses a 3-pin connector that plugs directly into a standard motherboard header or a compatible fan controller supplying 12 V power.
Will the 60 mm by 15 mm frame fit the same mounting holes as my existing 60 mm fans?
Yes, the 60 mm square frame with 15 mm thickness matches the standard 60 mm mounting pattern used by most 60 mm case and CPU fans.
How can I confirm the fan is spinning at the rated speed after installation?
Check the RPM reading in BIOS or monitoring software; it should report speeds up to 1600 RPM when the fan is powered at 12 V.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001036BTC
Na zalogi