Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60 mm square case fan with 25 mm depth, two-pin connector, no LED

Zyvpee

Zyvpee 2410ML-04W-B10 L23 60*25mm 12V 0.1A 2-Pin Ball Bearing Case Fan

SKU CH-ZR9E-KZ7A7

A 60 mm ball-bearing case fan running at up to 1600 RPM on 12 V with a 2-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNo
  • Ball bearing runs below 1600 RPM for quiet operation
  • 12 V 0.1 A draw keeps power use low
  • 60 × 25 mm frame fits tight chassis spaces
  • Two-pin connector enables simple motherboard hookup
  • Black finish blends with standard case interiors

Compact 60 mm ball-bearing fan

This Zyvpee 2410ML-04W-B10 L23 case fan measures 60 by 25 mm and runs on 12 V at 0.1 A. A two-pin connector supplies power to the ball-bearing motor, which spins below 1600 RPM. The black frame carries no LED lighting, keeping the appearance neutral for standard CPU cooling duties.

Suited for tight 60 mm mounts without PWM needs

The 6025 form factor fits small chassis or legacy heatsinks that accept only a 60 mm square frame. The two-pin design delivers fixed voltage operation, so speed cannot be modulated by the motherboard. Builders who require variable speed control, higher airflow, or integrated lighting should consider other options.

Two-pin fixed-voltage connector decides fit

The 2-pin power connector means the fan runs at full 12 V whenever the system is on, with no PWM or voltage-regulation signal from the board. Verify that your header or fan controller provides a standard two-pin 12 V supply before ordering.

Privalumai

  • Ball bearing runs below 1600 RPM for quiet operation
  • 12 V 0.1 A draw keeps power use low
  • 60 × 25 mm frame fits tight chassis spaces
  • Two-pin connector enables simple motherboard hookup
  • Black finish blends with standard case interiors

Specifikacijos

BrandZyvpee
Series2410ML-04W-B10 L23
Model2410ML-04W-B10
TypeCase Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions60*25MM

Klausimai apie šią prekę

What size mounting holes does the 60 mm square frame need?

The fan uses a standard 60 mm square frame with mounting holes spaced for 60 mm centres.

How do I connect the 2-pin power lead without reversing polarity?

Align the red wire to the +12 V pin and the black wire to ground on the motherboard header before pressing the connector home.

When should the ball bearing be inspected or the fan replaced?

Plan a check after several years of continuous running; replace the unit if RPM drops well below 1600 or noise increases.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.