Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 60 mm square case fan with 25 mm depth, two-pin connector, no LED

Zyvpee

Zyvpee 2410ML-04W-B10 L23 60*25mm 12V 0.1A 2-Pin Ball Bearing Case Fan

SKU CH-ZR9E-KZ7A7

A 60 mm ball-bearing case fan running at up to 1600 RPM on 12 V with a 2-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNo
  • Ball bearing runs below 1600 RPM for quiet operation
  • 12 V 0.1 A draw keeps power use low
  • 60 × 25 mm frame fits tight chassis spaces
  • Two-pin connector enables simple motherboard hookup
  • Black finish blends with standard case interiors

Compact 60 mm ball-bearing fan

This Zyvpee 2410ML-04W-B10 L23 case fan measures 60 by 25 mm and runs on 12 V at 0.1 A. A two-pin connector supplies power to the ball-bearing motor, which spins below 1600 RPM. The black frame carries no LED lighting, keeping the appearance neutral for standard CPU cooling duties.

Suited for tight 60 mm mounts without PWM needs

The 6025 form factor fits small chassis or legacy heatsinks that accept only a 60 mm square frame. The two-pin design delivers fixed voltage operation, so speed cannot be modulated by the motherboard. Builders who require variable speed control, higher airflow, or integrated lighting should consider other options.

Two-pin fixed-voltage connector decides fit

The 2-pin power connector means the fan runs at full 12 V whenever the system is on, with no PWM or voltage-regulation signal from the board. Verify that your header or fan controller provides a standard two-pin 12 V supply before ordering.

Öne çıkanlar

  • Ball bearing runs below 1600 RPM for quiet operation
  • 12 V 0.1 A draw keeps power use low
  • 60 × 25 mm frame fits tight chassis spaces
  • Two-pin connector enables simple motherboard hookup
  • Black finish blends with standard case interiors

Teknik özellikler

BrandZyvpee
Series2410ML-04W-B10 L23
Model2410ML-04W-B10
TypeCase Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions60*25MM

Bu ürünle ilgili sorular

What size mounting holes does the 60 mm square frame need?

The fan uses a standard 60 mm square frame with mounting holes spaced for 60 mm centres.

How do I connect the 2-pin power lead without reversing polarity?

Align the red wire to the +12 V pin and the black wire to ground on the motherboard header before pressing the connector home.

When should the ball bearing be inspected or the fan replaced?

Plan a check after several years of continuous running; replace the unit if RPM drops well below 1600 or noise increases.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.