Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 60 by 20 mm case fan with three wires

Zyvpee

Zyvpee KDE1206PKV3 6020 12V .8W 3 Pin case fan

SKU CH-6A8P-9PFH3

A 60 mm maglev case fan spinning below 1600 RPM at 12 V and 0.8 W with a 3 pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Low 0.8 W draw keeps system power use minimal
  • Maglev bearing reduces friction for quieter operation
  • 12 V 3-pin connector fits standard motherboard headers
  • Sub-1600 RPM limit balances airflow with low noise
  • Compact 60 × 20 mm frame suits tight CPU cooler mounts

Compact 60 mm frame for tight builds

The Zyvpee KDE1206PKV3 is a 60 mm square case fan with a 20 mm thickness, designed to fit small-form-factor chassis or CPU coolers that require a slim 6020 profile. It runs on 12 V DC power and draws .8 W through a standard three-pin connector, while the maglev bearing keeps noise low at speeds below 1600 RPM.

Suits slim coolers and space-constrained cases

Builders fitting a low-profile CPU cooler or a compact enclosure that only accepts a 60 mm mounting pattern will find this fan matches the required dimensions and voltage. Buyers who need a larger frame or higher static pressure for dense radiators should look at other options.

Maglev bearing rated below 1600 RPM

The magnetic levitation bearing reduces friction and wear, allowing the fan to spin quietly up to its rated speed limit while maintaining the .8 W power draw on the three-pin header.

Privalumai

  • Low 0.8 W draw keeps system power use minimal
  • Maglev bearing reduces friction for quieter operation
  • 12 V 3-pin connector fits standard motherboard headers
  • Sub-1600 RPM limit balances airflow with low noise
  • Compact 60 × 20 mm frame suits tight CPU cooler mounts

Specifikacijos

BrandZyvpee
SeriesKDE1206PKV3
ModelKDE1206PKV3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*20MM

Klausimai apie šią prekę

How high does the fan speed go before thermal throttling becomes an issue?

The fan spins at a maximum of 1600 RPM, so sustained loads will be limited by that ceiling rather than a higher speed rating.

What noise and heat levels should I expect when the fan runs continuously at 12 V?

At 0.8 W draw the fan produces minimal heat, and the maglev bearing keeps acoustic output low even during all‑day operation.

Does my motherboard need a 3‑pin DC header to control this fan?

Yes, the fan uses a standard 3‑pin connector, so a 3‑pin DC header on the board is required for power and speed control.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.