Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Small black 60 by 20 mm case fan with three wires

Zyvpee

Zyvpee KDE1206PKV3 6020 12V .8W 3 Pin case fan

SKU CH-6A8P-9PFH3

A 60 mm maglev case fan spinning below 1600 RPM at 12 V and 0.8 W with a 3 pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Low 0.8 W draw keeps system power use minimal
  • Maglev bearing reduces friction for quieter operation
  • 12 V 3-pin connector fits standard motherboard headers
  • Sub-1600 RPM limit balances airflow with low noise
  • Compact 60 × 20 mm frame suits tight CPU cooler mounts

Compact 60 mm frame for tight builds

The Zyvpee KDE1206PKV3 is a 60 mm square case fan with a 20 mm thickness, designed to fit small-form-factor chassis or CPU coolers that require a slim 6020 profile. It runs on 12 V DC power and draws .8 W through a standard three-pin connector, while the maglev bearing keeps noise low at speeds below 1600 RPM.

Suits slim coolers and space-constrained cases

Builders fitting a low-profile CPU cooler or a compact enclosure that only accepts a 60 mm mounting pattern will find this fan matches the required dimensions and voltage. Buyers who need a larger frame or higher static pressure for dense radiators should look at other options.

Maglev bearing rated below 1600 RPM

The magnetic levitation bearing reduces friction and wear, allowing the fan to spin quietly up to its rated speed limit while maintaining the .8 W power draw on the three-pin header.

Istaknuto

  • Low 0.8 W draw keeps system power use minimal
  • Maglev bearing reduces friction for quieter operation
  • 12 V 3-pin connector fits standard motherboard headers
  • Sub-1600 RPM limit balances airflow with low noise
  • Compact 60 × 20 mm frame suits tight CPU cooler mounts

Specifikacije

BrandZyvpee
SeriesKDE1206PKV3
ModelKDE1206PKV3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*20MM

Pitanja o ovom artiklu

How high does the fan speed go before thermal throttling becomes an issue?

The fan spins at a maximum of 1600 RPM, so sustained loads will be limited by that ceiling rather than a higher speed rating.

What noise and heat levels should I expect when the fan runs continuously at 12 V?

At 0.8 W draw the fan produces minimal heat, and the maglev bearing keeps acoustic output low even during all‑day operation.

Does my motherboard need a 3‑pin DC header to control this fan?

Yes, the fan uses a standard 3‑pin connector, so a 3‑pin DC header on the board is required for power and speed control.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.