Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 140mm square case fan with 25mm depth and 4-pin connector

Zyvpee

Zyvpee MFE0251V3-1Q07U-S9D 140mm case fan

SKU CH-0JN8-TC20V

A 140 mm case fan with ball bearing and 4-pin PWM control for 12 V systems

  • TypeCase Fan
  • Fan Size140mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 140 mm frame moves more air per revolution
  • 25 mm thickness fits standard 14025 mounting points
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design reduces friction for longer life
  • Non-LED black finish keeps builds clean and professional

140 mm PWM case fan

The Zyvpee MFE0251V3-1Q07U-S9D is a 140 mm case fan built for standard chassis cooling. It uses a four-pin PWM connector so motherboard fan headers can regulate speed automatically. The ball-bearing motor is rated for continuous operation at 12 V. This unit suits builders who need a straightforward replacement or additional airflow without lighting.

140 × 25 mm frame and airflow headroom

The 140 mm diameter and 25 mm thickness fit most modern mid-tower and full-tower mounts designed for 14025 fans. At full PWM duty the fan moves enough air for typical CPU coolers and front-intake configurations. It will run out of static pressure in dense radiator stacks or restrictive mesh panels where higher-pressure models are required.

Four-pin PWM integration and cable routing

The 4-pin header plugs directly into any standard motherboard PWM header, eliminating the need for adapters or fan controllers. A black, non-LED frame keeps the aesthetic neutral for windowed or closed builds. Builders who need addressable RGB illumination or daisy-chained fan hubs should look elsewhere.

Privalumai

  • 140 mm frame moves more air per revolution
  • 25 mm thickness fits standard 14025 mounting points
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design reduces friction for longer life
  • Non-LED black finish keeps builds clean and professional

Specifikacijos

Brand3ccooler.com
SeriesMFE0251V3-1Q07U-S9D
ModelMFE0251V3-1Q07U-S9D
TypeCase Fan
Fan Size140mm
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCase Fan
Dimensions140*25mm

Klausimai apie šią prekę

Will the 4-pin connector on this 140mm fan work with a motherboard that only has 3-pin headers?

The fan uses a 4-pin PWM connector and is backward compatible with 3-pin headers; speed will be controlled by voltage instead of PWM signal.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading from the 4-pin header and verify airflow direction matches the arrow on the 140*25mm frame.

Does the box include mounting screws for the 140mm frame or must I buy them separately?

The fan ships as a bare 140*25mm unit; mounting screws are not included and must be purchased separately if your case does not supply them.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.