暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 140mm square case fan with 25mm depth and 4-pin connector

Zyvpee

Zyvpee MFE0251V3-1Q07U-S9D 140mm case fan

SKU CH-0JN8-TC20V

A 140 mm case fan with ball bearing and 4-pin PWM control for 12 V systems

  • TypeCase Fan
  • Fan Size140mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 140 mm frame moves more air per revolution
  • 25 mm thickness fits standard 14025 mounting points
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design reduces friction for longer life
  • Non-LED black finish keeps builds clean and professional

140 mm PWM case fan

The Zyvpee MFE0251V3-1Q07U-S9D is a 140 mm case fan built for standard chassis cooling. It uses a four-pin PWM connector so motherboard fan headers can regulate speed automatically. The ball-bearing motor is rated for continuous operation at 12 V. This unit suits builders who need a straightforward replacement or additional airflow without lighting.

140 × 25 mm frame and airflow headroom

The 140 mm diameter and 25 mm thickness fit most modern mid-tower and full-tower mounts designed for 14025 fans. At full PWM duty the fan moves enough air for typical CPU coolers and front-intake configurations. It will run out of static pressure in dense radiator stacks or restrictive mesh panels where higher-pressure models are required.

Four-pin PWM integration and cable routing

The 4-pin header plugs directly into any standard motherboard PWM header, eliminating the need for adapters or fan controllers. A black, non-LED frame keeps the aesthetic neutral for windowed or closed builds. Builders who need addressable RGB illumination or daisy-chained fan hubs should look elsewhere.

特長

  • 140 mm frame moves more air per revolution
  • 25 mm thickness fits standard 14025 mounting points
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design reduces friction for longer life
  • Non-LED black finish keeps builds clean and professional

仕様

Brand3ccooler.com
SeriesMFE0251V3-1Q07U-S9D
ModelMFE0251V3-1Q07U-S9D
TypeCase Fan
Fan Size140mm
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCase Fan
Dimensions140*25mm

この商品に関する質問

Will the 4-pin connector on this 140mm fan work with a motherboard that only has 3-pin headers?

The fan uses a 4-pin PWM connector and is backward compatible with 3-pin headers; speed will be controlled by voltage instead of PWM signal.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading from the 4-pin header and verify airflow direction matches the arrow on the 140*25mm frame.

Does the box include mounting screws for the 140mm frame or must I buy them separately?

The fan ships as a bare 140*25mm unit; mounting screws are not included and must be purchased separately if your case does not supply them.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。