Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 120 by 38 millimetre case fan with four pin connector

Zyvpee

Zyvpee THA1248BE -BH43 48V 2.5A 4 Pin 120x38mm case fan

SKU CH-WPEX-36Z0M

A 120 mm by 38 mm ball-bearing case fan running at 48 V and 2.5 A with a 4-pin power connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • Ball-bearing design reduces wear for longer service life
  • 48 V 2.5 A input delivers strong airflow for demanding cooling
  • 4-pin PWM connector enables precise speed control via motherboard
  • 120 mm × 38 mm frame fits standard mounting points
  • Non-LED black finish keeps the build clean and professional

Zyvpee 48 V 4-pin server fan

The Zyvpee THA1248BE -BH43 is a 120 mm by 38 mm case fan built for 48 V DC power rails. It draws 2.5 A through a standard four-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame suits rackmount and industrial enclosures.

Suited for high-voltage chassis

This unit fits servers or telecom gear that distribute 48 V directly to cooling devices. Builders using common 12 V motherboard headers or looking for PWM speed control on consumer platforms cannot use this fan without additional conversion hardware.

48 V 2.5 A power specification

The defining parameter is the 48 V 2.5 A rating combined with a four-pin power connector. Verify that your chassis power distribution board supplies exactly this voltage and current capacity before purchase.

Privalumai

  • Ball-bearing design reduces wear for longer service life
  • 48 V 2.5 A input delivers strong airflow for demanding cooling
  • 4-pin PWM connector enables precise speed control via motherboard
  • 120 mm × 38 mm frame fits standard mounting points
  • Non-LED black finish keeps the build clean and professional

Specifikacijos

Brand3ccooler.com
SeriesTHA1248BE -BH43
ModelTHA1248BE
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions120*38mm

Klausimai apie šią prekę

How do I install the 120x38 mm 4-pin fan and which step is often missed?

Mount the fan using the four 120 mm screw holes, connect the 4-pin PWM header to the motherboard, and set the fan to PWM mode in BIOS so the 48 V 2.5 A motor receives the correct control signal.

What maintenance will the ball-bearing 48 V 2.5 A fan need later?

The sealed ball bearing is lubricated for life; only periodic dust removal from the 120x38 mm frame and blades is required to maintain airflow.

What limit appears first when the THA1248BE -BH43 runs continuously at full load?

The 48 V 2.5 A power rating caps the motor at 120 W, so sustained operation is limited by the connector and supply current rather than thermal headroom.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.