暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120 by 38 millimetre case fan with four pin connector

Zyvpee

Zyvpee THA1248BE -BH43 48V 2.5A 4 Pin 120x38mm case fan

SKU CH-WPEX-36Z0M

A 120 mm by 38 mm ball-bearing case fan running at 48 V and 2.5 A with a 4-pin power connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • Ball-bearing design reduces wear for longer service life
  • 48 V 2.5 A input delivers strong airflow for demanding cooling
  • 4-pin PWM connector enables precise speed control via motherboard
  • 120 mm × 38 mm frame fits standard mounting points
  • Non-LED black finish keeps the build clean and professional

Zyvpee 48 V 4-pin server fan

The Zyvpee THA1248BE -BH43 is a 120 mm by 38 mm case fan built for 48 V DC power rails. It draws 2.5 A through a standard four-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame suits rackmount and industrial enclosures.

Suited for high-voltage chassis

This unit fits servers or telecom gear that distribute 48 V directly to cooling devices. Builders using common 12 V motherboard headers or looking for PWM speed control on consumer platforms cannot use this fan without additional conversion hardware.

48 V 2.5 A power specification

The defining parameter is the 48 V 2.5 A rating combined with a four-pin power connector. Verify that your chassis power distribution board supplies exactly this voltage and current capacity before purchase.

特長

  • Ball-bearing design reduces wear for longer service life
  • 48 V 2.5 A input delivers strong airflow for demanding cooling
  • 4-pin PWM connector enables precise speed control via motherboard
  • 120 mm × 38 mm frame fits standard mounting points
  • Non-LED black finish keeps the build clean and professional

仕様

Brand3ccooler.com
SeriesTHA1248BE -BH43
ModelTHA1248BE
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions120*38mm

この商品に関する質問

How do I install the 120x38 mm 4-pin fan and which step is often missed?

Mount the fan using the four 120 mm screw holes, connect the 4-pin PWM header to the motherboard, and set the fan to PWM mode in BIOS so the 48 V 2.5 A motor receives the correct control signal.

What maintenance will the ball-bearing 48 V 2.5 A fan need later?

The sealed ball bearing is lubricated for life; only periodic dust removal from the 120x38 mm frame and blades is required to maintain airflow.

What limit appears first when the THA1248BE -BH43 runs continuously at full load?

The 48 V 2.5 A power rating caps the motor at 120 W, so sustained operation is limited by the connector and supply current rather than thermal headroom.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。