Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

10Gtek

10Gtek BCM57810S-DA2 10Gbps Dual SFP+ PCIe 2.0 x8 Network Card

SKU CH-CGRH-7X8AH

Adds dual 10 Gbps SFP+ links over a PCIe 2.0 x8 slot using a Broadcom 57810 controller, with low-profile bracket and driver CD included

  • Speed10Gbps
  • Connectors2 x SFP
  • InterfacePCI-Express

Ports 2 x SFP

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

Option Compatible Broadcom BCM57810S

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Dual SFP+ ports enable 10 Gbps links using modules, DAC or AOC
  • Broadcom BCM57810S controller delivers stable server-grade performance
  • PCIe 2.0 x8 fits both x8 and x16 slots for flexible deployment
  • Works with Windows Server 2008, R2, HPC 2008, Hyper-V, RHEL 5.7, 6.1, SLES 10, 11, VMware 4.1u2, 5.0u1
  • Includes driver CD plus full-height and low-profile brackets for easy installation

10Gbps dual SFP+ network adapter

The 10Gtek BCM57810S-DA2 provides two 10Gbps SFP+ ports for servers and workstations that need high-throughput wired connectivity. A Broadcom BCM57810S controller handles the link, and the card fits PCIe 2.0 x8 or x16 slots. Both full-height and low-profile brackets are included for flexible chassis fit.

Passive cooling and modest power draw

The adapter uses a heatsink without a fan, so it adds no audible noise to rack or tower builds. Power consumption stays low enough for standard slot delivery without auxiliary connectors. Driver support covers Windows Server 2008 and 2008 R2, Red Hat Enterprise Linux 5.7 and 6.1, SLES 10 and 11, plus VMware 4.1 and 5.0.

Steady throughput under sustained load

The dual-port design maintains line-rate 10Gbps traffic on both links during extended transfers, avoiding the throttling seen on single-port cards. The Broadcom controller offloads checksum and segmentation tasks to keep host CPU usage predictable. Not suited for hot-swap bays or fibre-channel environments.

Priekšrocības

  • Dual SFP+ ports enable 10 Gbps links using modules, DAC or AOC
  • Broadcom BCM57810S controller delivers stable server-grade performance
  • PCIe 2.0 x8 fits both x8 and x16 slots for flexible deployment
  • Works with Windows Server 2008, R2, HPC 2008, Hyper-V, RHEL 5.7, 6.1, SLES 10, 11, VMware 4.1u2, 5.0u1
  • Includes driver CD plus full-height and low-profile brackets for easy installation

Specifikācijas

Brand10Gtek
Speed10Gbps
Connectors2 x SFP
InterfacePCI-Express

Citas šī modeļa versijas

Vēl 4 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the BCM57810S-DA2 in a low-profile server and which bracket should I use?

Insert the card into a PCIe 2.0 x8 or x16 slot, then attach the included low-profile bracket for small form factor cases or the standard bracket for full-height chassis. Secure the bracket screw before connecting any SFP+ modules.

What ongoing maintenance does the dual-port 10GbE adapter require?

No scheduled maintenance is needed; keep the SFP+ cages dust-free and update drivers from the Broadcom site when OS releases change. The board has no fan or replaceable filter.

Which limit appears first when both SFP+ ports run sustained 10Gbps traffic?

The PCIe 2.0 x8 host interface sets the ceiling; each port can hit 10Gbps but aggregate throughput cannot exceed the bus bandwidth.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.