Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

10Gtek

10Gtek I210T1 1 Gbps PCIe 2.1 x1 network card

SKU CH-FA25-441ZS

A single-port gigabit Ethernet adapter using an Intel I210 controller on a PCIe 2.1 x1 interface with low-profile bracket included

  • StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
  • Speed1 Gbps
  • Connectors1 x RJ45
  • InterfacePCI-Express
  • Temperature0°C ~ 55°C

Ports 1 x RJ45

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

Option Intel I210

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Gigabit throughput for fast wired networking
  • Intel I210 controller for stable server performance
  • PCIe 2.1 x1 fits x1, x4, x8, x16 slots
  • Single RJ45 port supports Cat-5 cables up to 100 m
  • Low-profile bracket included for small-form-factor cases

Single-port Gigabit PCIe 2.1 card

The 10Gtek I210T1 adds one 1 Gbps RJ45 link through a PCI Express 2.1 x1 slot. It uses an Intel I210 controller with intelligent offloads to keep servers stable under load. The board fits standard and low-profile brackets so it works in compact chassis. Drivers cover Windows from XP to Server 2019, plus Linux, FreeBSD and VMware ESXi.

Replaces single-port Intel 10/100/1000 adapters

It substitutes cards such as the EXPI9301CTBLK, E1G42ET or Intel I210-T1 that occupy the same x1 lane. The jump is worth it when a legacy 10/100 NIC limits throughput or when a failed onboard port needs a drop-in replacement with current OS support. Wake-on-LAN and jumbo frames up to 9.5 KB are included.

Handles 100 m copper runs at line rate

The single RJ45 port drives Category-5 or better cable to the full 100 m distance at 1 Gbps. PCIe 2.1 x1 supplies 2.5 GT/s bandwidth, leaving no headroom bottleneck for Gigabit traffic. It does not support hot-swap, multi-port aggregation or 10 Gbps speeds, so builders needing extra ports or higher throughput should look elsewhere.

Priekšrocības

  • Gigabit throughput for fast wired networking
  • Intel I210 controller for stable server performance
  • PCIe 2.1 x1 fits x1, x4, x8, x16 slots
  • Single RJ45 port supports Cat-5 cables up to 100 m
  • Low-profile bracket included for small-form-factor cases

Specifikācijas

Brand10Gtek
StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
Speed1 Gbps
Connectors1 x RJ45
InterfacePCI-Express
Temperature0°C ~ 55°C

Citas šī modeļa versijas

Vēl 4 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What slot does the PCIe 2.1 x1 interface require?

It fits any PCI Express x1, x4, x8 or x16 slot running at 2.5 G T/s.

Which bracket should I use when installing the card in a low-profile chassis?

Swap the standard bracket for the included low-profile bracket before seating the card; the driver CD installs after the hardware is secured.

How far can I run the Cat5 cable from the single RJ45 port?

Up to 100 m at 1 Gbps within the 0 °C to 55 °C operating range.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.