Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

10Gtek

10Gtek I210T1 1 Gbps PCIe 2.1 x1 network card

SKU CH-FA25-441ZS

A single-port gigabit Ethernet adapter using an Intel I210 controller on a PCIe 2.1 x1 interface with low-profile bracket included

  • StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
  • Speed1 Gbps
  • Connectors1 x RJ45
  • InterfacePCI-Express
  • Temperature0°C ~ 55°C

Ports 1 x RJ45

Versiunile tăiate există, dar nu sunt disponibile aici.

Option Intel I210

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Gigabit throughput for fast wired networking
  • Intel I210 controller for stable server performance
  • PCIe 2.1 x1 fits x1, x4, x8, x16 slots
  • Single RJ45 port supports Cat-5 cables up to 100 m
  • Low-profile bracket included for small-form-factor cases

Single-port Gigabit PCIe 2.1 card

The 10Gtek I210T1 adds one 1 Gbps RJ45 link through a PCI Express 2.1 x1 slot. It uses an Intel I210 controller with intelligent offloads to keep servers stable under load. The board fits standard and low-profile brackets so it works in compact chassis. Drivers cover Windows from XP to Server 2019, plus Linux, FreeBSD and VMware ESXi.

Replaces single-port Intel 10/100/1000 adapters

It substitutes cards such as the EXPI9301CTBLK, E1G42ET or Intel I210-T1 that occupy the same x1 lane. The jump is worth it when a legacy 10/100 NIC limits throughput or when a failed onboard port needs a drop-in replacement with current OS support. Wake-on-LAN and jumbo frames up to 9.5 KB are included.

Handles 100 m copper runs at line rate

The single RJ45 port drives Category-5 or better cable to the full 100 m distance at 1 Gbps. PCIe 2.1 x1 supplies 2.5 GT/s bandwidth, leaving no headroom bottleneck for Gigabit traffic. It does not support hot-swap, multi-port aggregation or 10 Gbps speeds, so builders needing extra ports or higher throughput should look elsewhere.

Puncte forte

  • Gigabit throughput for fast wired networking
  • Intel I210 controller for stable server performance
  • PCIe 2.1 x1 fits x1, x4, x8, x16 slots
  • Single RJ45 port supports Cat-5 cables up to 100 m
  • Low-profile bracket included for small-form-factor cases

Specificații

Brand10Gtek
StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
Speed1 Gbps
Connectors1 x RJ45
InterfacePCI-Express
Temperature0°C ~ 55°C

Alte versiuni ale acestui model

4 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What slot does the PCIe 2.1 x1 interface require?

It fits any PCI Express x1, x4, x8 or x16 slot running at 2.5 G T/s.

Which bracket should I use when installing the card in a low-profile chassis?

Swap the standard bracket for the included low-profile bracket before seating the card; the driver CD installs after the hardware is secured.

How far can I run the Cat5 cable from the single RJ45 port?

Up to 100 m at 1 Gbps within the 0 °C to 55 °C operating range.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.