10Gtek
10Gtek I210T1 1 Gbps PCIe 2.1 x1 network card
A single-port gigabit Ethernet adapter using an Intel I210 controller on a PCIe 2.1 x1 interface with low-profile bracket included
- StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
- Speed1 Gbps
- Connectors1 x RJ45
- InterfacePCI-Express
- Temperature0°C ~ 55°C
Option Intel I210
- Compatible Intel X540-T2
- Compatible Intel EXPI9301CT
- Compatible Intel X520-DA1
- Compatible Intel X520-DA2
- Compatible Intel X540-T1
- Compatible Broadcom BCM57810S
- Compatible Intel 82576
- Compatible Intel 82571
- Intel I350AM4(4*RJ45)
- Intel I210
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
- Gigabit throughput for fast wired networking
- Intel I210 controller for stable server performance
- PCIe 2.1 x1 fits x1, x4, x8, x16 slots
- Single RJ45 port supports Cat-5 cables up to 100 m
- Low-profile bracket included for small-form-factor cases
Single-port Gigabit PCIe 2.1 card
The 10Gtek I210T1 adds one 1 Gbps RJ45 link through a PCI Express 2.1 x1 slot. It uses an Intel I210 controller with intelligent offloads to keep servers stable under load. The board fits standard and low-profile brackets so it works in compact chassis. Drivers cover Windows from XP to Server 2019, plus Linux, FreeBSD and VMware ESXi.
Replaces single-port Intel 10/100/1000 adapters
It substitutes cards such as the EXPI9301CTBLK, E1G42ET or Intel I210-T1 that occupy the same x1 lane. The jump is worth it when a legacy 10/100 NIC limits throughput or when a failed onboard port needs a drop-in replacement with current OS support. Wake-on-LAN and jumbo frames up to 9.5 KB are included.
Handles 100 m copper runs at line rate
The single RJ45 port drives Category-5 or better cable to the full 100 m distance at 1 Gbps. PCIe 2.1 x1 supplies 2.5 GT/s bandwidth, leaving no headroom bottleneck for Gigabit traffic. It does not support hot-swap, multi-port aggregation or 10 Gbps speeds, so builders needing extra ports or higher throughput should look elsewhere.
주요 특징
- Gigabit throughput for fast wired networking
- Intel I210 controller for stable server performance
- PCIe 2.1 x1 fits x1, x4, x8, x16 slots
- Single RJ45 port supports Cat-5 cables up to 100 m
- Low-profile bracket included for small-form-factor cases
사양
| Brand | 10Gtek |
|---|---|
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3ab |
| Speed | 1 Gbps |
| Connectors | 1 x RJ45 |
| Interface | PCI-Express |
| Temperature | 0°C ~ 55°C |
이 모델의 다른 버전
같은 라인업에서 4개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
10Gtek 82571-GE-2T-X1 dual-port Gigabit PCIe x1 network card
- IEEE802.3
- 10/100/1000Mbps
10Gtek BCM57810S-DA2 10Gbps Dual SFP+ PCIe 2.0 x8 Network Card
- 10Gbps
- 2 x SFP
10Gtek X520-DA1 10Gb PCIe 2.0 x8 SFP+ network card
- IEEE802.3, IEEE802.…
- 10Gbps
이 상품에 대한 질문
What slot does the PCIe 2.1 x1 interface require?
It fits any PCI Express x1, x4, x8 or x16 slot running at 2.5 G T/s.
Which bracket should I use when installing the card in a low-profile chassis?
Swap the standard bracket for the included low-profile bracket before seating the card; the driver CD installs after the hardware is secured.
How far can I run the Cat5 cable from the single RJ45 port?
Up to 100 m at 1 Gbps within the 0 °C to 55 °C operating range.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…







