Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 16GB (2x8GB) DDR3 1066 ECC RDIMM 2Rx4 1.5V 240-Pin Kit

SKU CH-T964-X0ENP

A 16 GB dual-channel DDR3 1066 kit with ECC registered DIMMs for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit expands server capacity
  • DDR3 1066 MHz PC3-8500R speed handles demanding workloads
  • ECC registered design corrects data errors automatically
  • 2Rx4 dual-rank x4 organisation increases memory density
  • 5 V standard voltage ensures broad DDR3 compatibility

16 GB DDR3 ECC RDIMM Kit

This 16 GB kit contains two 8 GB registered DIMMs built for DDR3 servers and workstations. It delivers ECC error correction and registered signalling for stable operation in multi-socket platforms. The modules run at 1.5 V standard DDR3 voltage. Desktop and laptop systems cannot use this memory.

Capacity and headroom at 1066 MHz

The dual-channel 16 GB total suits virtualisation hosts, database nodes and compute clusters that need reliable capacity without the highest frequency. At DDR3 1066 (PC3-8500) the bandwidth ceiling is reached sooner than with faster DDR3 grades, so workloads that stream large datasets continuously will see the limit first.

Upgrade path from smaller registered kits

Replacing a 4 GB or 8 GB registered kit with this 16 GB set doubles or quadruples usable memory while keeping the same 240-pin form factor and 1.5 V supply. The jump is worthwhile when your server board supports registered DIMMs and the workload outgrows the current capacity, but it offers no benefit on platforms that require unbuffered memory.

Priekšrocības

  • 16 GB dual-channel kit expands server capacity
  • DDR3 1066 MHz PC3-8500R speed handles demanding workloads
  • ECC registered design corrects data errors automatically
  • 2Rx4 dual-rank x4 organisation increases memory density
  • 5 V standard voltage ensures broad DDR3 compatibility

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-8500R
Capacity16GB (2 x 8GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will these DDR3 1066 ECC RDIMMs run alongside my existing PC3-8500R modules?

Yes, both operate at 1066 MHz with 1.5V and registered ECC, so they will run together at the lowest common speed and timing.

How can I confirm the 2Rx4 registered ECC kit is detected correctly after installation?

Check the BIOS memory summary or your OS system information — it should show 16 GB total, 1066 MHz, ECC enabled, and registered DIMM type.

What comes in the box and is anything else required for a dual-channel server upgrade?

The kit includes two 8 GB DDR3 240-pin RDIMM modules; no extra parts are needed if your server has two free slots in the same channel.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.