Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

A-Tech

A-Tech 16GB (2x8GB) DDR3 1066 ECC RDIMM 2Rx4 1.5V 240-Pin Kit

SKU CH-T964-X0ENP

A 16 GB dual-channel DDR3 1066 kit with ECC registered DIMMs for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit expands server capacity
  • DDR3 1066 MHz PC3-8500R speed handles demanding workloads
  • ECC registered design corrects data errors automatically
  • 2Rx4 dual-rank x4 organisation increases memory density
  • 5 V standard voltage ensures broad DDR3 compatibility

16 GB DDR3 ECC RDIMM Kit

This 16 GB kit contains two 8 GB registered DIMMs built for DDR3 servers and workstations. It delivers ECC error correction and registered signalling for stable operation in multi-socket platforms. The modules run at 1.5 V standard DDR3 voltage. Desktop and laptop systems cannot use this memory.

Capacity and headroom at 1066 MHz

The dual-channel 16 GB total suits virtualisation hosts, database nodes and compute clusters that need reliable capacity without the highest frequency. At DDR3 1066 (PC3-8500) the bandwidth ceiling is reached sooner than with faster DDR3 grades, so workloads that stream large datasets continuously will see the limit first.

Upgrade path from smaller registered kits

Replacing a 4 GB or 8 GB registered kit with this 16 GB set doubles or quadruples usable memory while keeping the same 240-pin form factor and 1.5 V supply. The jump is worthwhile when your server board supports registered DIMMs and the workload outgrows the current capacity, but it offers no benefit on platforms that require unbuffered memory.

I korthet

  • 16 GB dual-channel kit expands server capacity
  • DDR3 1066 MHz PC3-8500R speed handles demanding workloads
  • ECC registered design corrects data errors automatically
  • 2Rx4 dual-rank x4 organisation increases memory density
  • 5 V standard voltage ensures broad DDR3 compatibility

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-8500R
Capacity16GB (2 x 8GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will these DDR3 1066 ECC RDIMMs run alongside my existing PC3-8500R modules?

Yes, both operate at 1066 MHz with 1.5V and registered ECC, so they will run together at the lowest common speed and timing.

How can I confirm the 2Rx4 registered ECC kit is detected correctly after installation?

Check the BIOS memory summary or your OS system information — it should show 16 GB total, 1066 MHz, ECC enabled, and registered DIMM type.

What comes in the box and is anything else required for a dual-channel server upgrade?

The kit includes two 8 GB DDR3 240-pin RDIMM modules; no extra parts are needed if your server has two free slots in the same channel.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.