Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR3 ECC registered DIMMs with gold contacts and black chips

A-Tech

A-Tech 16GB (2x8GB) DDR3 1600 ECC RDIMM 1Rx4 1.5V 240-Pin Server RAM

SKU CH-VR55-2N9AJ

A 16 GB dual-channel DDR3 1600 kit with ECC registered DIMMs for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1600 (PC3 12800)

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1600 MHz CL11 delivers responsive data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin 1Rx4 modules install in matched pairs

Server DDR3 upgrade kit

This 16 GB kit contains two 8 GB DDR3 1600 MHz registered ECC DIMMs built for servers and workstations that require registered memory. The modules operate at 1.5 V with CL11 latency and use a single-rank x4 organisation. They are not compatible with standard desktop or laptop platforms.

Registered ECC integration

Each 240-pin DIMM presents a registered signal to the memory controller, reducing electrical load on the command bus and allowing larger memory configurations in multi-socket systems. ECC circuitry detects and corrects single-bit errors, protecting data integrity in mission-critical workloads. The dual-channel kit populates paired channels for balanced bandwidth.

Standard voltage thermals

Running at the standard 1.5 V DDR3 voltage, the modules draw typical power for registered DIMMs of this speed and density. Heat output is consistent with other DDR3 1600 registered parts and is managed by normal server airflow. No additional cooling beyond standard chassis ventilation is required.

Priekšrocības

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1600 MHz CL11 delivers responsive data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin 1Rx4 modules install in matched pairs

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-12800R
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What CAS latency does the kit run at under sustained load?

The modules operate at CL11 latency when running continuously at DDR3 1600 speed.

How much heat and power should I expect from the registered DIMMs during all-day operation?

Each module draws 1.5 V standard DDR3 voltage; registered buffering adds minimal extra heat compared with unbuffered DIMMs.

Which server or workstation platforms accept this DDR3 1600 ECC RDIMM kit?

The kit fits any system that supports DDR3 Registered ECC DIMMs at 1600 MHz with 240-pin slots; check your manual for qualified memory lists.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.