Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 ECC registered DIMMs with gold contacts and black chips

A-Tech

A-Tech 16GB (2x8GB) DDR3 1600 ECC RDIMM 1Rx4 1.5V 240-Pin Server RAM

SKU CH-VR55-2N9AJ

A 16 GB dual-channel DDR3 1600 kit with ECC registered DIMMs for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1600 (PC3 12800)

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1600 MHz CL11 delivers responsive data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin 1Rx4 modules install in matched pairs

Server DDR3 upgrade kit

This 16 GB kit contains two 8 GB DDR3 1600 MHz registered ECC DIMMs built for servers and workstations that require registered memory. The modules operate at 1.5 V with CL11 latency and use a single-rank x4 organisation. They are not compatible with standard desktop or laptop platforms.

Registered ECC integration

Each 240-pin DIMM presents a registered signal to the memory controller, reducing electrical load on the command bus and allowing larger memory configurations in multi-socket systems. ECC circuitry detects and corrects single-bit errors, protecting data integrity in mission-critical workloads. The dual-channel kit populates paired channels for balanced bandwidth.

Standard voltage thermals

Running at the standard 1.5 V DDR3 voltage, the modules draw typical power for registered DIMMs of this speed and density. Heat output is consistent with other DDR3 1600 registered parts and is managed by normal server airflow. No additional cooling beyond standard chassis ventilation is required.

Kohokohdat

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1600 MHz CL11 delivers responsive data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin 1Rx4 modules install in matched pairs

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-12800R
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What CAS latency does the kit run at under sustained load?

The modules operate at CL11 latency when running continuously at DDR3 1600 speed.

How much heat and power should I expect from the registered DIMMs during all-day operation?

Each module draws 1.5 V standard DDR3 voltage; registered buffering adds minimal extra heat compared with unbuffered DIMMs.

Which server or workstation platforms accept this DDR3 1600 ECC RDIMM kit?

The kit fits any system that supports DDR3 Registered ECC DIMMs at 1600 MHz with 240-pin slots; check your manual for qualified memory lists.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.