A-Tech 16GB (2x8GB) DDR3 1066 ECC RDIMM 2Rx4 1.5V 240-Pin Kit
- 16GB (2 x 8GB)
- DDR3 1066 (PC3 8500)
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
Dual-channel 16 GB DDR3L 1066 ECC registered kit with 4Rx8 modules at 1.35 V for servers
Capacity 16GB (2 x 8GB)
Speed DDR3L 1066 (PC3L 8500)
This A-Tech kit supplies 16 GB of DDR3L registered ECC memory in a matched pair of 8 GB modules. It is built for servers and workstations that require quad-rank registered DIMMs and will not function in desktop or laptop platforms. The dual-channel configuration helps maximise throughput on compatible multi-channel memory controllers.
Each module operates at 1.35 V, the standard DDR3 low-voltage level, and can also run at 1.5 V if the system requires it. Registered buffering and ECC circuitry add minimal overhead while providing error correction and signal integrity for continuous operation. The 1066 MHz speed rating keeps power consumption modest compared with higher-frequency server memory.
The modules are organised as 4Rx8, meaning each DIMM presents four ranks to the memory controller. Many server platforms limit the total number of ranks per channel, so this kit is only suitable for systems that explicitly support quad-rank registered DIMMs at the PC3L-8500 speed grade.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 4Rx8 PC3L-8500R |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips lock, then verify the system recognises all 16 GB in the BIOS before closing the case.
No routine maintenance is required; if a module fails, replace the faulty 8 GB stick with another DDR3L 1066 4Rx8 ECC RDIMM of matching voltage and rank.
The memory controller's maximum supported rank count per channel is typically reached before bandwidth or thermal limits, so populate slots according to the server manual's rank-per-channel guidelines.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?