A-Tech 16GB (2x8GB) DDR3 1866 ECC RDIMM 1Rx4 CL13 1.5V 240-Pin Server RAM
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8 GB DDR3 1333 MHz ECC unbuffered DIMM for servers and workstations, 2Rx8 dual-rank, 1.5 V, 240-pin
Capacity 8GB
Speed DDR3 1333 (PC3 10600)
This 8 GB DDR3 1333 MHz ECC unbuffered DIMM adds 8 GB of error-correcting memory to compatible servers and workstations. It is built for systems that require ECC UDIMM modules and will not fit desktop or laptop platforms. The module operates at standard 1.5 V and uses a 240-pin interface.
The stick uses a 2Rx8 dual-rank organisation with major-brand chips and carries a CL9 latency rating. Its 240-pin DIMM form factor seats directly into DDR3 server slots without registration buffers, so installation follows the system manual’s channel guidelines.
Running at 1.50 V keeps power draw at the normal DDR3 level, allowing typical server cooling to manage thermals without extra airflow. ECC operation adds a small overhead but maintains data integrity under sustained workloads.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx8 PC3-10600E |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at 1333 MHz with a PC3-10600 data rate, delivering up to 10600 MB/s bandwidth when the system supports that speed.
It requires a standard 240-pin DDR3 DIMM slot and 1.5 V power; the dual-rank 2Rx8 layout fits any compatible server or workstation board.
Power off, open the chassis, align the notch, press firmly until both clips lock, then verify in BIOS that ECC is enabled — many forget the BIOS check.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?