A-Tech 8GB 1Rx8 DDR4 2400 ECC REG RDIMM 288-Pin Server RAM
- 8GB
- 288-Pin DDR4 SDRAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB DDR3 1333 ECC registered quad-channel kit for compatible servers and workstations
Capacity 32GB (4 x 8GB)
Speed DDR3 1333 (PC3 10600)
This 32GB kit contains four 8GB DDR3 1333 registered ECC modules built for servers and workstations that require registered memory. The dual-rank x4 organisation and CL9 latency suit multi-socket platforms needing error correction and signal integrity. It is not compatible with desktop or laptop computers that accept only unbuffered DIMMs.
The four-module kit populates a quad-channel memory controller, so each channel receives one 8GB rank-balanced DIMM. Registered buffering reduces electrical load on the memory bus, freeing the processor to address larger capacities without timing penalties. Verify that your system manual specifies DDR3 RDIMM support and the correct channel population order before installation.
ECC circuitry detects and corrects single-bit errors during continuous operation, preventing data corruption in long-running workloads. Standard 1.5V DDR3 voltage maintains stable power draw across extended duty cycles. Major-brand chips are tested for reliable performance under sustained server and workstation loads.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx4 PC3-10600R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules run at 1333 MHz with CL9 latency; sustained throughput is capped by that bus speed and the registered buffer, so the memory subsystem will limit performance before the CPU does.
Each 8 GB module operates at the standard 1.5 V DDR3 voltage; registered DIMMs draw slightly more power than unbuffered types, but total heat stays within normal server DIMM limits for 24/7 operation.
The board must provide DDR3 registered DIMM slots with ECC support and a memory controller that can address 2Rx4 modules in a quad-channel configuration.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?