A-Tech 16GB (2x8GB) DDR3 1866 ECC RDIMM 2Rx4 1.5V server RAM
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
16 GB dual-channel DDR3 1866 ECC RDIMM kit with CL13 latency and 1.5 V operation for registered server memory slots
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB registered ECC DIMMs built for servers and workstations that require DDR3 1866 memory. The modules use a 2Rx8 dual-rank layout and operate at the standard 1.5 V DDR3 voltage. Only systems that support registered DDR3 DIMMs can use this memory.
The registered design places a register between the memory controller and the DRAM chips, reducing electrical load on the bus during continuous operation. This helps maintain signal integrity when all slots are populated under heavy multi-threaded workloads. ECC circuitry corrects single-bit errors on the fly without halting the system. CL13 latency at 1866 MHz provides predictable timing for long-running tasks.
The decisive specification is the 240-pin registered ECC DIMM form factor combined with DDR3 1866 speed. Desktop and laptop platforms cannot accept registered modules, so this kit will not fit consumer motherboards. Verify that your server or workstation manual lists DDR3 RDIMM support before ordering.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx8 PC3-14900R |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Each module is rated at 1.5V standard DDR3 voltage; actual power draw depends on the server's memory controller and workload, not on the kit alone.
The motherboard must accept DDR3 registered ECC RDIMMs in a 240-pin slot and be a server or workstation platform; desktop or laptop boards will not work.
Mixing ranks is possible if the motherboard supports it, but the memory controller will typically run all populated channels at the lowest common speed and voltage.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?