Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR3 ECC UDIMM sticks, 240-pin, black chips, silver contacts

A-Tech

A-Tech 16GB (4x4GB) DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-YGEQ-JC45P

A 16 GB quad-channel DDR3 1600 ECC UDIMM kit for servers and workstations running at 1.5 V with CL11 latency

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3 1600 (PC3 12800)

  • 16GB quad-channel kit expands server memory capacity
  • CL11 latency at 1600 MHz speeds data access
  • ECC unbuffered design protects data integrity in workloads
  • Dual-rank 2Rx8 organisation increases memory density per slot
  • Standard 1.5V DDR3 voltage ensures broad platform compatibility

Server Memory Kit

This 16 GB DDR3 kit contains four 4 GB unbuffered ECC modules built for compatible servers and workstations. The dual-rank 2Rx8 organisation runs at 1600 MHz with CL11 latency at the standard 1.5 V. It is not suitable for desktop or laptop platforms.

Thermals and Power

Operating at the JEDEC 1.5 V level keeps power draw modest and heat output low in normal server workloads. Passive cooling from chassis airflow is sufficient for typical operation. No active cooling or additional voltage is required.

Sustained Load Behaviour

Under continuous heavy utilisation the modules maintain rated 1600 MHz speed and CL11 timing without throttling. ECC circuitry corrects single-bit errors throughout extended sessions to preserve data integrity in critical applications.

Priekšrocības

  • 16GB quad-channel kit expands server memory capacity
  • CL11 latency at 1600 MHz speeds data access
  • ECC unbuffered design protects data integrity in workloads
  • Dual-rank 2Rx8 organisation increases memory density per slot
  • Standard 1.5V DDR3 voltage ensures broad platform compatibility

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-12800E
Capacity16GB (4 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 240-pin DDR3 ECC UDIMM modules in the correct quad-channel order?

Insert each 4 GB module into the slots your motherboard manual designates for quad-channel operation, pressing straight down until the retention clips lock on both ends.

What maintenance will the 1.5 V DDR3 ECC UDIMM kit require over time?

No scheduled maintenance is needed; dust the slots with compressed air if the system runs in a dirty environment.

At what point does the CL11 latency become the bottleneck during sustained workloads?

The CAS latency of 11 cycles at 1600 MHz is fixed, so it limits random-access response before bandwidth saturates.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.