Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR3 DIMM modules with black chips, 240-pin gold contacts, ECC unbuffered server memory

A-Tech

A-Tech 16GB (4x4GB) DDR3 1866 ECC UDIMM CL13 1.5V Quad Kit

SKU CH-AJP2-4RE8X

16 GB quad-channel DDR3-1866 ECC UDIMM kit with CL13 latency and 1.5 V operation for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput
  • CL13 latency at 1.5 V balances responsiveness with standard power
  • ECC unbuffered design detects and corrects single-bit errors
  • 240-pin single-rank x8 modules fit compatible DDR3 server slots

Server DDR3 quad kit

This 16 GB kit contains four 4 GB DDR3 1866 modules built for servers and workstations that require ECC unbuffered memory. Each stick is a single-rank 1Rx8 DIMM running at standard 1.5 V with CL13 latency. The kit is not compatible with desktop or laptop platforms.

Thermals and power

Standard 1.5 V DDR3 voltage keeps power draw predictable in multi-DIMM server configurations. Unbuffered ECC operation adds minimal overhead while providing error correction for data integrity. Quad-channel population distributes electrical load evenly across the memory controller.

Build and connectors

Four 240-pin UDIMMs use major-brand chips tested for reliability in continuous operation. Single-rank x8 organisation supports dense population without signal degradation. Modules must be seated according to the system manual to activate quad-channel mode and ensure proper ECC function.

Priekšrocības

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput
  • CL13 latency at 1.5 V balances responsiveness with standard power
  • ECC unbuffered design detects and corrects single-bit errors
  • 240-pin single-rank x8 modules fit compatible DDR3 server slots

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity16GB (4 x 4GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the four 240-pin DDR3 modules so the quad-channel kit works correctly?

Shut down the server, open the chassis, align each module notch with the slot key, press firmly until the retention clips lock on both sides, then populate all four slots following the motherboard manual's channel order.

What maintenance or replacement will this ECC UDIMM kit need over its service life?

ECC corrects single-bit errors automatically; no scheduled maintenance is required, and a module is only replaced if the system logs uncorrectable errors or a diagnostic test flags a failure.

At what point does the 1.5 V voltage limit appear first during sustained heavy workloads?

The JEDEC-standard 1.5 V supply is the primary constraint; if the memory controller cannot maintain that voltage under load, the system will throttle or halt before any thermal limit is reached.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.