NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
A 16 GB DDR3 1066 MHz ECC registered DIMM with 4Rx4 organisation for compatible HP servers
This 16 GB DDR3 1066 MHz ECC registered DIMM is built as a direct replacement for the listed HP part numbers. It uses a 240-pin form factor and operates at the standard 1.5 V DDR3 voltage. The module is intended for server and workstation systems that require registered memory with error correction.
The module fits systems that accept 4Rx4 registered DIMMs with CL7 latency at PC3-8500 speed. It will not work in desktop boards or laptops that require unbuffered non-ECC UDIMMs. Buyers needing lower-density ranks such as 1Rx4 or 2Rx4 should verify their platform's rank limit before ordering.
The quad-rank 4Rx4 organisation is the critical specification that governs how many modules a server memory controller can address per channel. Exceeding the platform's maximum rank count per channel prevents the system from posting, so confirm the supported rank limit in the server documentation before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The package contains one 16 GB DDR3 1066 MHz ECC RDIMM with 240 pins and nothing else; no brackets, cables or additional modules are included.
Choose this 16 GB 4Rx4 CL7 module when your system requires a single registered ECC DIMM at 1066 MHz; select a different capacity or rank only if your server's qualified-vendor list specifies another configuration.
The module runs at 1066 MHz with CL7 latency at 1.5 V as a registered ECC DIMM, delivering the standard DDR3-1066 data rate for compatible HP server platforms.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?