NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 16 GB DDR3 1066 MHz ECC registered DIMM with 4Rx4 organisation for compatible HP servers
This 16 GB DDR3 1066 MHz ECC registered DIMM is built as a direct replacement for the listed HP part numbers. It uses a 240-pin form factor and operates at the standard 1.5 V DDR3 voltage. The module is intended for server and workstation systems that require registered memory with error correction.
The module fits systems that accept 4Rx4 registered DIMMs with CL7 latency at PC3-8500 speed. It will not work in desktop boards or laptops that require unbuffered non-ECC UDIMMs. Buyers needing lower-density ranks such as 1Rx4 or 2Rx4 should verify their platform's rank limit before ordering.
The quad-rank 4Rx4 organisation is the critical specification that governs how many modules a server memory controller can address per channel. Exceeding the platform's maximum rank count per channel prevents the system from posting, so confirm the supported rank limit in the server documentation before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The package contains one 16 GB DDR3 1066 MHz ECC RDIMM with 240 pins and nothing else; no brackets, cables or additional modules are included.
Choose this 16 GB 4Rx4 CL7 module when your system requires a single registered ECC DIMM at 1066 MHz; select a different capacity or rank only if your server's qualified-vendor list specifies another configuration.
The module runs at 1066 MHz with CL7 latency at 1.5 V as a registered ECC DIMM, delivering the standard DDR3-1066 data rate for compatible HP server platforms.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?