Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 240-pin DDR3L LRDIMM with black memory chips

A-Tech

A-Tech 16GB DDR3L 1333 ECC LRDIMM 4Rx4 1.35V 240-Pin Server Memory

SKU CH-9A1G-2FW1F

Adds 16GB of DDR3L 1333 ECC LRDIMM server memory with 4Rx4 organisation at 1.35V

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 16GB DDR3L ECC LRDIMM boosts server capacity
  • 35V low voltage reduces power draw per module
  • 1333MHz PC3-10600 speed handles demanding workloads
  • 4Rx4 load-reduced design supports high-density configurations
  • 240-pin DIMM form factor fits standard server slots

16GB DDR3L ECC LRDIMM Server Module

This 16GB DDR3L 1333 ECC Load Reduced DIMM is built for server and workstation platforms that require registered memory with error correction. The single module operates at 1.35V low voltage and uses a 4Rx4 organisation to deliver 16GB capacity in one 240-pin slot. It serves administrators upgrading compatible systems or replacing failed Hynix HMT42GL7BMR4A-H9 sticks.

Suits ECC LRDIMM servers.

The module targets systems that explicitly support DDR3L ECC Load Reduced DIMMs at PC3L-10600 speed. It will not function in consumer desktop motherboards, laptops, or any platform limited to unbuffered non-ECC UDIMMs. Buyers needing standard DDR3 UDIMMs, higher frequencies, or non-ECC memory should select a different product line.

Verify DDR3L LRDIMM support and slot availability

Check the system manual or vendor memory-qualified list to confirm DDR3L 1333 ECC LRDIMM compatibility and maximum supported capacity per slot. Ensure the platform accepts 4Rx4 organisation and 1.35V operation. Confirm an empty 240-pin DIMM socket is available and that the BIOS revision in use recognises Load Reduced modules of this density.

Priekšrocības

  • 16GB DDR3L ECC LRDIMM boosts server capacity
  • 35V low voltage reduces power draw per module
  • 1333MHz PC3-10600 speed handles demanding workloads
  • 4Rx4 load-reduced design supports high-density configurations
  • 240-pin DIMM form factor fits standard server slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT42GL7BMR4A-H9
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesHMT42GL7BMR4A-H9

Jautājumi par šo preci

Does my server motherboard need DDR3L 240-pin LRDIMM slots to use this 16GB module?

Yes, this module is a DDR3L 1333MHz ECC Load Reduced DIMM with a 240-pin interface, so the motherboard must support DDR3L LRDIMM at 1.35V.

Can I mix this 4Rx4 LRDIMM with standard registered DIMMs already installed in my system?

No, Load Reduced DIMMs use a different buffering architecture than standard RDIMMs; the memory controller requires all slots to use the same LRDIMM type.

How can I confirm the module is running at the correct 1333MHz speed and CL9 latency after installation?

Check the BIOS memory information screen or use a system utility such as CPU-Z to verify the reported speed shows 1333MHz (PC3-10600) and CAS latency of CL9.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.