Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 240-pin DDR3L LRDIMM with black memory chips

A-Tech

A-Tech 16GB DDR3L 1333 ECC LRDIMM 4Rx4 1.35V 240-Pin Server Memory

SKU CH-9A1G-2FW1F

Adds 16GB of DDR3L 1333 ECC LRDIMM server memory with 4Rx4 organisation at 1.35V

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 16GB DDR3L ECC LRDIMM boosts server capacity
  • 35V low voltage reduces power draw per module
  • 1333MHz PC3-10600 speed handles demanding workloads
  • 4Rx4 load-reduced design supports high-density configurations
  • 240-pin DIMM form factor fits standard server slots

16GB DDR3L ECC LRDIMM Server Module

This 16GB DDR3L 1333 ECC Load Reduced DIMM is built for server and workstation platforms that require registered memory with error correction. The single module operates at 1.35V low voltage and uses a 4Rx4 organisation to deliver 16GB capacity in one 240-pin slot. It serves administrators upgrading compatible systems or replacing failed Hynix HMT42GL7BMR4A-H9 sticks.

Suits ECC LRDIMM servers.

The module targets systems that explicitly support DDR3L ECC Load Reduced DIMMs at PC3L-10600 speed. It will not function in consumer desktop motherboards, laptops, or any platform limited to unbuffered non-ECC UDIMMs. Buyers needing standard DDR3 UDIMMs, higher frequencies, or non-ECC memory should select a different product line.

Verify DDR3L LRDIMM support and slot availability

Check the system manual or vendor memory-qualified list to confirm DDR3L 1333 ECC LRDIMM compatibility and maximum supported capacity per slot. Ensure the platform accepts 4Rx4 organisation and 1.35V operation. Confirm an empty 240-pin DIMM socket is available and that the BIOS revision in use recognises Load Reduced modules of this density.

I korthet

  • 16GB DDR3L ECC LRDIMM boosts server capacity
  • 35V low voltage reduces power draw per module
  • 1333MHz PC3-10600 speed handles demanding workloads
  • 4Rx4 load-reduced design supports high-density configurations
  • 240-pin DIMM form factor fits standard server slots

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT42GL7BMR4A-H9
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesHMT42GL7BMR4A-H9

Frågor om den här produkten

Does my server motherboard need DDR3L 240-pin LRDIMM slots to use this 16GB module?

Yes, this module is a DDR3L 1333MHz ECC Load Reduced DIMM with a 240-pin interface, so the motherboard must support DDR3L LRDIMM at 1.35V.

Can I mix this 4Rx4 LRDIMM with standard registered DIMMs already installed in my system?

No, Load Reduced DIMMs use a different buffering architecture than standard RDIMMs; the memory controller requires all slots to use the same LRDIMM type.

How can I confirm the module is running at the correct 1333MHz speed and CL9 latency after installation?

Check the BIOS memory information screen or use a system utility such as CPU-Z to verify the reported speed shows 1333MHz (PC3-10600) and CAS latency of CL9.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.