NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
A 16GB DDR4 3200MHz ECC registered DIMM with 2Rx8 organisation and CL22 latency for server memory upgrades
This 16GB DDR4 3200MHz registered DIMM delivers error-correcting memory for server and workstation platforms. It operates at 1.2V with CL22 latency and uses a 2Rx8 organisation across 288 pins. The module is built with major-brand chips and validated as a compatible equivalent for Micron MTA18ASF2G72PDZ-3G2 and MTA18ASF2G72PDZ-3G2E part numbers.
The memory directly replaces Micron MTA18ASF2G72PDZ-3G2 and MTA18ASF2G72PDZ-3G2E sticks in qualified systems. The upgrade is worthwhile when the platform requires registered ECC DDR4 at 3200MHz and the existing slots support 2Rx8 density. Verify the system's qualified vendor list before installation to confirm support for this speed and rank configuration.
This module fits servers and workstations that accept DDR4 288-pin registered ECC DIMMs at 3200MHz. It will not work in desktop boards that require unbuffered non-ECC memory or in systems limited to lower DDR4 speeds. Buyers needing unbuffered DIMMs, higher capacities per module, or different voltage specifications should look at other products.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.2V voltage required by registered server slots.
Install modules in the channel order listed in your server manual; the common mistake is skipping a primary slot and leaving a channel unbalanced.
No firmware or battery maintenance is needed; ECC error correction operates transparently, and the module has no serviceable parts.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?