NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 16GB DDR4 3200MHz ECC registered DIMM with 2Rx8 organisation and CL22 latency for server memory upgrades
This 16GB DDR4 3200MHz registered DIMM delivers error-correcting memory for server and workstation platforms. It operates at 1.2V with CL22 latency and uses a 2Rx8 organisation across 288 pins. The module is built with major-brand chips and validated as a compatible equivalent for Micron MTA18ASF2G72PDZ-3G2 and MTA18ASF2G72PDZ-3G2E part numbers.
The memory directly replaces Micron MTA18ASF2G72PDZ-3G2 and MTA18ASF2G72PDZ-3G2E sticks in qualified systems. The upgrade is worthwhile when the platform requires registered ECC DDR4 at 3200MHz and the existing slots support 2Rx8 density. Verify the system's qualified vendor list before installation to confirm support for this speed and rank configuration.
This module fits servers and workstations that accept DDR4 288-pin registered ECC DIMMs at 3200MHz. It will not work in desktop boards that require unbuffered non-ECC memory or in systems limited to lower DDR4 speeds. Buyers needing unbuffered DIMMs, higher capacities per module, or different voltage specifications should look at other products.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor and 1.2V voltage required by registered server slots.
Install modules in the channel order listed in your server manual; the common mistake is skipping a primary slot and leaving a channel unbalanced.
No firmware or battery maintenance is needed; ECC error correction operates transparently, and the module has no serviceable parts.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?