NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
32 GB DDR4 2400 ECC load-reduced DIMM with 4Rx4 organisation and CL17 latency for server and workstation upgrades
This 32GB DDR4 2400 module is built for servers and workstations that require ECC protection and load-reduced signalling. It carries a 4Rx4 organisation and runs at the standard 1.20V DDR4 voltage. The single DIMM suits administrators expanding memory capacity in compatible 288-pin platforms.
The module plugs into a standard DDR4 288-pin socket but demands a platform that accepts load-reduced DIMMs and 4Rx4 ranking. It frees the memory controller from the electrical load of conventional quad-rank registered DIMMs, allowing higher total capacity per channel. Systems limited to standard RDIMMs or lower rank counts cannot use this module.
Operating at DDR4 2400 (PC4-19200) with CAS latency 17, the DIMM delivers steady bandwidth under continuous server workloads such as virtualisation, database caching or large-file processing. ECC corrects single-bit errors on the fly, preventing data corruption during long uptime periods. The 1.20V operation keeps power draw predictable in densely populated chassis.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at CL17 and 1.20V, which are standard DDR4 timings; sustained throughput is limited by the 2400MHz bus rather than the CAS latency or voltage.
Operating at 1.2V DDR4 standard voltage, the LRDIMM design reduces electrical load on the memory bus, keeping power draw and thermal output lower than a comparable quad-rank RDIMM.
The system must provide a 288-pin DDR4 slot with ECC support and a chipset or CPU memory controller qualified for Load Reduced DIMMs.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?