NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
32 GB DDR4 2400 ECC load-reduced DIMM with 4Rx4 organisation and CL17 latency for server and workstation upgrades
This 32GB DDR4 2400 module is built for servers and workstations that require ECC protection and load-reduced signalling. It carries a 4Rx4 organisation and runs at the standard 1.20V DDR4 voltage. The single DIMM suits administrators expanding memory capacity in compatible 288-pin platforms.
The module plugs into a standard DDR4 288-pin socket but demands a platform that accepts load-reduced DIMMs and 4Rx4 ranking. It frees the memory controller from the electrical load of conventional quad-rank registered DIMMs, allowing higher total capacity per channel. Systems limited to standard RDIMMs or lower rank counts cannot use this module.
Operating at DDR4 2400 (PC4-19200) with CAS latency 17, the DIMM delivers steady bandwidth under continuous server workloads such as virtualisation, database caching or large-file processing. ECC corrects single-bit errors on the fly, preventing data corruption during long uptime periods. The 1.20V operation keeps power draw predictable in densely populated chassis.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at CL17 and 1.20V, which are standard DDR4 timings; sustained throughput is limited by the 2400MHz bus rather than the CAS latency or voltage.
Operating at 1.2V DDR4 standard voltage, the LRDIMM design reduces electrical load on the memory bus, keeping power draw and thermal output lower than a comparable quad-rank RDIMM.
The system must provide a 288-pin DDR4 slot with ECC support and a chipset or CPU memory controller qualified for Load Reduced DIMMs.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?