NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
A 32GB DDR4 2666MHz CL19 desktop DIMM with 288 pins, 1.2V operation, and unbuffered non-ECC design for compatible system upgrades
This 32GB DDR4 DIMM is an unbuffered, non-ECC module built as a compatible replacement for the Hynix HMAA4GU6MJR8N-VK part. It targets desktop systems that require a single high-density stick to expand memory capacity without populating multiple slots.
The 32GB capacity provides ample headroom for heavy multitasking, large datasets, and memory-intensive applications on supported platforms. Systems limited to lower maximum densities per slot or lower total memory ceilings will not be able to utilise the full module.
The module operates at 2666MHz with CL19 latency and 1.20V voltage on the standard DDR4 288-pin interface. Platforms that only support lower DDR4 data rates will downclock the module, while boards requiring registered or ECC memory cannot use this unbuffered DIMM.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GU6MJR8N-VK |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | HMAA4GU6MJR8N-VK |
| Recommend Use | Compatible Replacement for Hynix HMAA4GU6MJR8N-VK |
Yes, provided your motherboard supports mixed capacities and you install the modules in the correct slots for your board's channel layout.
You can keep the existing modules if a free 288-pin DDR4 slot is available and the total capacity does not exceed your CPU or chipset limit.
The module is rated for 2666MHz at CL19 with standard 1.20V operation; most systems will apply these settings automatically on first boot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?