NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32GB DDR4 2666MHz CL19 desktop DIMM with 288 pins, 1.2V operation, and unbuffered non-ECC design for compatible system upgrades
This 32GB DDR4 DIMM is an unbuffered, non-ECC module built as a compatible replacement for the Hynix HMAA4GU6MJR8N-VK part. It targets desktop systems that require a single high-density stick to expand memory capacity without populating multiple slots.
The 32GB capacity provides ample headroom for heavy multitasking, large datasets, and memory-intensive applications on supported platforms. Systems limited to lower maximum densities per slot or lower total memory ceilings will not be able to utilise the full module.
The module operates at 2666MHz with CL19 latency and 1.20V voltage on the standard DDR4 288-pin interface. Platforms that only support lower DDR4 data rates will downclock the module, while boards requiring registered or ECC memory cannot use this unbuffered DIMM.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GU6MJR8N-VK |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | HMAA4GU6MJR8N-VK |
| Recommend Use | Compatible Replacement for Hynix HMAA4GU6MJR8N-VK |
Yes, provided your motherboard supports mixed capacities and you install the modules in the correct slots for your board's channel layout.
You can keep the existing modules if a free 288-pin DDR4 slot is available and the total capacity does not exceed your CPU or chipset limit.
The module is rated for 2666MHz at CL19 with standard 1.20V operation; most systems will apply these settings automatically on first boot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?